Q: Why does the shifter feel loose? 2000 Chevy Prism

asked by on January 04, 2017

2000 Chevy prism 5speed. Why does it feel like the shifter feel loose...

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Water pump might be bad. Car has coolant leak.
Hi there. Coolant can leak from a number of different spots on your vehicle. If the coolant is steadily leaking while the engine is running, then it is typically the water pump. If not then it can be the radiator,...
What does the Engine Overheated -- Idle Engine message mean?
The Engine Overheated – Idle Engine message can appear on your driver information center (DIC). When the DIC displays this alert, your engine is too hot to drive safely. You should stop your car as soon as possible and let...
How do I use the windshield washer?
The windshield washer allows you to wash your windshields while you’re driving. This feature is excellent when you’ve been driving through dust or dirt, or have hit a lot of bugs, as it offers you maximum visibility. To use the...
Car jerking at 25 MPH
Hello. From what you describe, it sound like your transmission is slipping. The first thing to check would be the transmission fluid level. If the level is low, it will need to be topped up to the full level. If...
My catalytic converters need to be replaced
Hi there, thanks for writing in. First of all, removing a catalytic converter is illegal in all 50 states. They are federal emissions items, and there is a very stiff fine for removing or tampering with them on a vehicle...
Don't understand CEL Codes.
The codes P0300 through P0306 are for misfires of random cylinders or different cylinders. The second code P1456 is for the evaporative fuel tank system having a leak somewhere in the system (https://www.yourmechanic.com/article/how-to-diagnose-a-fluid-leak-by-mark-vallet). Since you are getting random misfires, then...
P0442
As you may already know, this may be related to a faulty or leaking gas cap, however this can also be related to several other factors such as the following: A non-conforming gas cap (i.e. not factory/original brand) A small...
Shift to 'P' range display on dash.
Hi there. The transmission position sensor may be damaged or has a short inside the sensor. Check the harness to the sensor and make sure that it's hooked up properly and has no moisture in it. If the harness is...
I have a 2006 BMW 525i rough idle
What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

Related articles

Symptoms of a Bad or Failing Shift Interlock Solenoid
The shift interlock solenoid needs to be replaced if the vehicle cannot shift out of park and the battery is not dead.
Symptoms of a Bad or Failing Transfer Case Output Shaft Seal
Common signs include difficulty shifting gears, grinding noises coming from underneath the vehicle, and jumping in and out of four-wheel drive.
How to Shift From First to Second Gear in a Manual Transmission Car
Shifting from first to second gear in a manual transmission requires accuracy and practice, as well as a feel for the car.