Volvo V90 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,662)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,662)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volvo V90 Power Steering Pressure Hose Replacement is $416 with $276 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Volvo V90L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$706.58Shop/Dealer Price$848.08 - $1264.46
1997 Volvo V90L6-2.9LService typePower Steering Pressure Hose ReplacementEstimate$697.57Shop/Dealer Price$837.30 - $1252.36
Show example Volvo V90 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33

Brandon

19 years of experience
318 reviews
Brandon
19 years of experience
Volvo V90 L6-2.9L - Oil Change - Raleigh, North Carolina
Brandon was awesome. Very knowledgeable about problems and offered great solutions. Definitely recommending my mechanic

Amor

44 years of experience
181 reviews
Amor
44 years of experience
Volvo V90 L6-2.9L - Top off coolant - Palo Alto, California
Didn't initially bring coolant even though job was to top up coolant. Had to leave and come back. But otherwise very smooth.

Michael

24 years of experience
53 reviews
Michael
24 years of experience
Volvo S80 L6-3.2L - Power Steering Pressure Hose Replacement - Farmington, Michigan
Probably the best mechanic I have ever had . Very professional, courteous and honest

Chuy

15 years of experience
503 reviews
Chuy
15 years of experience
Volvo S40 L5-2.5L Turbo - Check Engine Light is on - Chicago, Illinois
Great experience!!! Chuy was prompt and knowledgeable. He answered all my questions. I would definitely recommend him to ALL MY FAMILY AND FRIENDS!!!

Excellent Rating

(1,662)

Rating Summary
1,556
55
11
7
33
1,556
55
11
7
33
Number of Volvo services completed
18282+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan Sentra
The The 2012 Nissan Sentra is one of the most versatile sedans in its class. Because it has such a wide variety of options available in its four trims, buyers can choose between a bare-bones version at a very affordable...
How Long Does a Daytime Running Lamp Module Last?
The The daytime running lamp module automatically turns on your daytime running lights (DRLs). These lights are less intense than your headlights and make it easier for others to see you in the snow, rain, fog, and other inclement weather...
How to Buy a Personalized License Plate in Vermont
A A personalized license plate is one of the best ways to add personality to your vehicle. With a personalized license plate (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer), you can make your car uniquely you with a custom message at the front and back of...

Reving

You will need to check the engine intake for vacuum leaks and if not then replace the sticking idle control valve and then relearn the idle by disconnecting the battery and then reconnect after 10 minutes. Start and hold at...

I had my airbags replaced on my 2012 scion xb and instantly lost 61 miles per gas tank. Why?

When the airbags were replaced the battery would have been disconnected and may cause the computer to reset and can cause some loss of fuel mileage until the computer gets through relearn. If you still get lower fuel mileage after...

Hi,I can’t engine on.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com