Volkswagen Jetta City Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4,846)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4,846)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volkswagen Jetta City Power Steering Pressure Hose Replacement is $556 with $304 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Volkswagen Jetta CityL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$893.84Shop/Dealer Price$1054.03 - $1520.02
2008 Volkswagen Jetta CityL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$877.62Shop/Dealer Price$1034.63 - $1498.24
2007 Volkswagen Jetta CityL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$870.16Shop/Dealer Price$1025.35 - $1483.40
Show example Volkswagen Jetta City Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(4,846)

Rating Summary
4,551
144
34
32
85
4,551
144
34
32
85

Chad

17 years of experience
76 reviews
Chad
17 years of experience
Volkswagen Beetle L5-2.5L - Power Steering Pressure Hose - Richmond, Virginia
good

Dustin

9 years of experience
65 reviews
Dustin
9 years of experience
Volkswagen Jetta L5-2.5L - Power Steering Pressure Hose - Desoto, Texas
Honest, hard working, kept me informed every step of the way! Very knowledgeable! The only mechanic I will use!

Jean

16 years of experience
157 reviews
Jean
16 years of experience
Volkswagen Passat L4-1.8L Turbo - Oil Change - Tampa, Florida
Very knowledgeable. He explained to me the whole process. Very professional

Carlos

29 years of experience
601 reviews
Carlos
29 years of experience
Volkswagen Golf L5-2.5L - Vacuum Pump Repair - Fullerton, California
Very experienced guy. Thanks Carlos!

Excellent Rating

(4,846)

Rating Summary
4,551
144
34
32
85
4,551
144
34
32
85
Number of Volkswagen services completed
53306+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Colorado
Right-of-way Right-of-way laws are in place to ensure that if there are no traffic signs or signals, there are still rules in place that govern who goes first. These rules are based in courtesy and common sense, and work to...
How to Get a Texas Driver's Permit
Texas Texas uses a graduated driver's licensing program that requires all new drivers under 18 years old to begin driving with a learner’s license, in order to practice safe driving under supervision before getting their full driver’s license. To receive...
The Best Used Cars to Buy If You’re a Massage Therapist
If If you're a massage therapist, one of the cornerstones of your business has to be that you don’t keep your clients waiting. That means you need a vehicle that’s reliable. You also will have to move your gear, including...

What is the exhaust gas recirculation valve?

If you have a V6 Accord, your engine includes an exhaust gas recirculation valve (EGR). It works in conjunction with both the engine and the intake to reroute exhaust gases (a portion of them) back into the engine. This allows...

Car want start unless boosted, alternator good and battery good, while boosted the car crank in the key off position.

You should request a starter circuit diagnostic (https://www.yourmechanic.com/services/starter-replacement) to get this resolved. If you want to attempt to diagnose it yourself, first perform a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection) on the battery just to be sure that the battery is not an...

I have 2004 Mercury Sable. It randomly stalls, after putting in gas, on hot days, will start after resting AC goes hot during buck

Hi Sandy. Thanks for all the information - it's very helpful to initially provide some technical advice. It appears as if you might have a few different things going on with your Mercury Sable. First, in regards to the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com