Suzuki Aerio Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(39)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(39)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Suzuki Aerio Front Crankshaft Seal Replacement is $212 with $30 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki AerioL4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$262.46Shop/Dealer Price$282.38 - $331.61
2006 Suzuki AerioL4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$250.75Shop/Dealer Price$268.37 - $315.88
2007 Suzuki AerioL4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$250.75Shop/Dealer Price$268.40 - $315.94
2002 Suzuki AerioL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$272.97Shop/Dealer Price$296.18 - $360.37
2005 Suzuki AerioL4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$250.75Shop/Dealer Price$270.32 - $319.29
2003 Suzuki AerioL4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$272.97Shop/Dealer Price$296.36 - $360.69
Show example Suzuki Aerio Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(39)

Rating Summary
34
5
0
0
0
34
5
0
0
0

Junard

12 years of experience
161 reviews
Junard
12 years of experience
Suzuki Aerio L4-2.3L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Maple Shade, New Jersey
Pleasant professional

Alfred

14 years of experience
587 reviews
Alfred
14 years of experience
Suzuki Aerio L4-2.0L - Oil Change - San Francisco, California
Alfred did a GREAT job!

Jamahl

21 years of experience
830 reviews
Jamahl
21 years of experience
Suzuki Aerio L4-2.3L - Power Steering Belt - Kissimmee, Florida
Excellent, friendly, and knowledgeable. A great guy and solved my problem quickly and efficiently. Thank you, Jamahl!

Alexis

31 years of experience
94 reviews
Alexis
31 years of experience
Suzuki Aerio L4-2.0L - Car is not starting - Hialeah, Florida
Alexis was professional in provide answers to any question that I may have as well as a talking through any issue discovered so I could gain full understanding of the issue with my car and preventive measure or recommendations for alternatives option I can take. Truly helpful and the embodiment of a role model for all mechanic as trustworthy as a private primary care doctor would be to you instead with your car.

Excellent Rating

(39)

Rating Summary
34
5
0
0
0
34
5
0
0
0
Number of Suzuki Aerio services completed
429+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Dispose of Transmission Fluid
Transmission fluid needs to be changed at regular intervals. Old transmission fluid is recyclable. Proper disposal helps reduce overall waste.
P0808 OBD-II Trouble Code: Clutch Position Sensor Circuit High Malfunction
P0808 means there is an issue within the clutch position sensor circuit (manual) or with the PCM in automatic transmissions due too defective parts.
Idaho Parking Laws: Understanding the Basics
Idaho Idaho drivers know that they need to be careful and they need to obey the laws when they are out on the roadways. However, they also need to make sure they are abiding by the rules and regulations when...

I put a penny in place of a fuse, tried to start my car and now it wont start and makes a grinding sound when i try to start it

Hi there. Putting a penny in place of a fuse, not recommended, replace with the correct fuse (https://www.yourmechanic.com/services/fuse-replacement). The fuse is there, to protect the circuit. If the fuse blows (https://www.yourmechanic.com/services/electric-problems-inspection), there is a short to ground. The grinding sound,...

I have no power to the fuel pump or the fuel cut off switch. All fuses are good, what could it be?

Hi there - now that you have checked the fuses (Good job!) check the MFI relay on the under-the-hood fuse & relay box. It controls power to the fuel pump and the engine control unit (ECU). If it is working,...

Three of my Civic's power windows fail to operate simultaneously. are they having the same power switch problem?

Hello, thank you for writing in. At first it sounds as if the "child locks" have been turned on, make sure this is not the case. The power for the windows comes from the main and under dash fuse boxes,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com