Saturn SL2 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(151)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(151)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Saturn SL2 Power Steering Pressure Hose Replacement is $348 with $68 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$503.38Shop/Dealer Price$558.93 - $709.36
1995 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$464.80 - $569.04
1993 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$464.85 - $569.13
1998 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$464.85 - $569.12
1991 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$467.79 - $574.28
1994 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$465.13 - $569.61
2000 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$600.84Shop/Dealer Price$681.80 - $916.26
1996 Saturn SL2L4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$427.30Shop/Dealer Price$464.85 - $569.12
Show example Saturn SL2 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(151)

Rating Summary
139
8
1
2
1
139
8
1
2
1

Michael

7 years of experience
142 reviews
Michael
7 years of experience
Saturn SL2 L4-1.9L - Car is not starting - Seattle, Washington
Michael zeroed in on the problem and its root cause IMMEDIATELY and explained how it would be repaired in a simple and straightforward manner. After years of encountering surly mechanics, Michael restored my faith in people who love what they do and do good work!

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Saturn SL2 L4-1.9L - Car is not starting - Elmhurst, Illinois
He didn't give up and figured out the problem.

Adam

18 years of experience
48 reviews
Adam
18 years of experience
Saturn SL2 L4-1.9L - Oil Change - San Carlos, California
Adam communicated everything clearly, from beforehand (calling to let me know his revised ETA) to afterwards (reviewing what he did and what recommendations he had). He exuded professional competency and spoke with confidence.

Mark

38 years of experience
3 reviews
Mark
38 years of experience
Saturn SL2 L4-1.9L - Door does not lock or open - Kennesaw, Georgia
Very good experience. Mark was very professional assessing the car, in finding and correcting the problem, locating any other problems and advising how to correct them. Great service. Will recommend both Mark and your mechanic to my friends and family. Thanks

Excellent Rating

(151)

Rating Summary
139
8
1
2
1
139
8
1
2
1
Number of Saturn SL2 services completed
1661+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Clean and Restore Headlights
Even Even owners who regularly clean and maintain their vehicles are not immune to wear on their headlights. As the vast majority of headlights are made of plastic, they require different care than other exterior surfaces of your car. Plastic...
How to Choose the Best Family Car to Buy
Whether you’re looking to start a family or have a household of children to transport every day, families everywhere have more car buying options than ever before. From station wagons to SUVs, it seems that more and more cars are...
How Does Power Steering Impact a Vehicle’s Handling?
Many cars today, and almost all trucks and utility vehicles, feature power steering. Power steering (also known as...

Car radio randomly turns off by itself

Great question. A battery cell problem can't cause the radio to develop a problem, but a radio issue can certainly kill the battery. It sounds like your Sonic has something called parasitic battery drain. The radio may have been part...

Car keeps idling down and shutting off when I drive it.

Hello there and thanks for writing in. Generally belts will squeak when they are loose or not aligned correctly. Occasionally, they may need to have a bit of belt dressing put on them to lubricate them. Your idle issue may...

Hi my car won't start after I tried a [transmission](/topics-transmission-honda/) ecu reset. I took off battery and took off ecu fuse #18 in my 05 honda civi c

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com