Pontiac Wave5 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Wave5 Power Steering Pressure Hose Replacement is $398 with $258 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Pontiac Wave5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$763.24Shop/Dealer Price$897.81 - $1288.56
2005 Pontiac Wave5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$661.23Shop/Dealer Price$791.87 - $1179.68
2006 Pontiac Wave5L4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$661.23Shop/Dealer Price$791.90 - $1179.72
Show example Pontiac Wave5 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Edmar

23 years of experience
246 reviews
Edmar
23 years of experience
Pontiac Sunfire L4-2.4L - Power Steering Pressure Hose - Addison, Texas
Edmar was a professional... I would request/recommend Mr. Perez again myself and to friends. Very little trust in Auto mechanic's in general(specially auto repair shops). It was nice to experience a honest professional Auto Mechanic. Everyone has experienced dis honest auto repair shops.

Mark

42 years of experience
77 reviews
Mark
42 years of experience
Pontiac Vibe L4-1.8L - Power Steering Pressure Hose - Canton, Georgia
Wonderful guy, knows his stuff.

Nick

15 years of experience
90 reviews
Nick
15 years of experience
Pontiac Firebird V6-3.8L - Power Steering Pressure Hose - Elk Grove, California
Nick changed out my power steering pump and some hoses. He was early to my appointment and kept me posted on what was going on with my vehicle. he says what he does and does what he says. Great mechanic!

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Pontiac Sunfire L4-2.2L - Power Steering Pressure Hose - Greenwood, Indiana
Excellent!

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Pontiac Power Steering Pressure Hose Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Nail in My Tire?
The tire is a circular shaped piece of rubber that covers the wheel and enables the vehicle to drive, and...
P2A00 OBD-II Trouble Code: O2 Sensor Circuit Range/Performance Bank 1 Sensor 1
P2A00 means there is an abnormal voltage reading from the O2 sensor, possibly due to a defective sensor, malfunctioning circuit, or leak.
2012 Nissan Altima vs. 2012 Volkswagen Passat: Which One Should I Buy?
Sedans are a special class of vehicle: created to provide a comfortable and often luxurious ride to those who have passed beyond the need to stick to the compact class. These slightly larger vehicles offer options the compacts and subcompacts...

rough idle on start up everytime

You could have several things contributing to the hard start (https://www.yourmechanic.com/services/car-is-hard-to-start-inspection). Dirty or faulty throttle valve, idle air control valve, bad temperature sensor, and more. I suggest having a certified technician, like one from YourMechanic, perform a few tests to...

Reduced engine power light keeps coming on.

When a fault/error in the transmission or engine triggers the Reduced Engine Power Warning Light, the vehicle will experience an extreme loss of power and performance and vehicles may not be able to exceed speeds greater than 20 miles per...

When I try starting the veichal it just clicks

What you are describing sounds like a faulty starter solenoid (https://www.yourmechanic.com/services/starter-replacement). A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that transmit...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com