Pontiac Strato-Chief Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(105)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(105)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Pontiac Strato-Chief Brake Pad Replacement is $178 with $83 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1966 Pontiac Strato-ChiefV8-5.3LService typeBrake Pads - Rear ReplacementEstimate$280.31Shop/Dealer Price$331.64 - $463.13
1969 Pontiac Strato-ChiefV8-7.0LService typeBrake Pads - Rear ReplacementEstimate$279.31Shop/Dealer Price$332.66 - $465.67
1965 Pontiac Strato-ChiefV8-5.3LService typeBrake Pads - Rear ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1969 Pontiac Strato-ChiefL6-4.1LService typeBrake Pads - Rear ReplacementEstimate$279.31Shop/Dealer Price$332.63 - $465.62
1968 Pontiac Strato-ChiefV8-5.3LService typeBrake Pads - Rear ReplacementEstimate$279.31Shop/Dealer Price$332.68 - $465.70
1965 Pontiac Strato-ChiefV8-5.7LService typeBrake Pads - Front ReplacementEstimate$260.31Shop/Dealer Price$311.66 - $443.16
1960 Pontiac Strato-ChiefV8-5.7LService typeBrake Pads - Rear ReplacementEstimate$265.31Shop/Dealer Price$316.52 - $447.92
1964 Pontiac Strato-ChiefV8-5.3LService typeBrake Pads - Front ReplacementEstimate$265.31Shop/Dealer Price$316.89 - $448.58
Show example Pontiac Strato-Chief Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(105)

Rating Summary
101
2
1
0
1
101
2
1
0
1

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Pontiac Aztek V6-3.4L - Brake Pads Replacement (Front) - Halethorpe, Maryland
Great

Robert

32 years of experience
191 reviews
Robert
32 years of experience
Pontiac Vibe L4-2.4L - Brake Pads Replacement (Front, Rear) - Mountain View, California

Lee

19 years of experience
113 reviews
Lee
19 years of experience
Pontiac G6 V6-3.5L - Brake Pads Replacement (Front) - Richmond, Virginia
Lee was on time and very professional.

Allen

36 years of experience
471 reviews
Allen
36 years of experience
Pontiac Vibe L4-1.8L - Brake Pads Replacement (Front) - Casselberry, Florida
Allen was great. He showed up early and was very friendly and outgoing. He had no problem letting me hover around him while he worked, and explained to me what he was doing and what his recommendations were. He seemed like a genuine and honest guy.

Excellent Rating

(105)

Rating Summary
101
2
1
0
1
101
2
1
0
1
Number of Pontiac Brake Pad Replacement services completed
1155+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Exhaust Gas Recirculation (EGR) Valve
The The exhaust gas recirculation valve (EGR valve) serves to dramatically reduce the emissions that are key contributors to pollution in the air. While EGR systems were not routinely added to engines until 1973, nearly all engines produced or on...
How to Buy a Good Quality Fuel Injector
Getting Getting fuel directly to an engine is accomplished through an electronic fuel injector; with each cylinder getting its own dose of fuel which is much more efficient than the ways carburetors would send fuel directly to the engine in...
How to Maintain and Protect Your Tires
Car tires are important to staying safe on the road. Check your tire pressure or if there is any dry rot or cracking to make your tires last longer.

Rear lights won't turn off

The rear lights are your brake lights that are staying on, which is why the cruise control is not working. The brake lights will disengage the cruise control. The most likely cause is the brake light switch rubber push bumper...

The radio will not illuminate.

Hi there: In most cases, this problem is caused by an electrical wire internally that has shorted and causes the screen to not illuminate. It can be fixed by a professional electronics expert, but the cost of doing this is...

Ignition was destroyed by crook can I start this motor?

If your car has a factory installed anti-theft system, starting the car is much more difficult. The anit-theft system uses the ignition key, ignition lock cylinder and switch to determine if the car will be allowed to start. There are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com