Pontiac LeMans Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac LeMans Power Steering Pressure Hose Replacement is $322 with $140 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Pontiac LeMansL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$716.74Shop/Dealer Price$850.23 - $1240.17
1991 Pontiac LeMansL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$719.63Shop/Dealer Price$851.00 - $1239.36
1990 Pontiac LeMansL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$501.33Shop/Dealer Price$578.16 - $802.82
1992 Pontiac LeMansL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$719.63Shop/Dealer Price$851.04 - $1239.42
1990 Pontiac LeMansL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$719.63Shop/Dealer Price$853.10 - $1243.03
Show example Pontiac LeMans Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Pontiac LeMans V8-5.3L - clean out fuel pump and install filter. run new fuel line. clean out feed line - Anthem, Arizona
I selected Peter as my mechanic because of his vast knowledge (and very high rating) of classic cars. I own a 1966 Pontiac that needed some issues sorted out, Peter diagnosed and made the repairs to get me on the road again. Peter was very friendly and answered all my questions in a thorough manner. I would not hesitate to call Peter again, for any type of vehicle.

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Pontiac LeMans V8-5.3L - Distributor - Anthem, Arizona
Always excellent service from Pete.

Isai

28 years of experience
230 reviews
Isai
28 years of experience
Pontiac LeMans V8-5.7L - Inspection / Diagnostics - San Antonio, Texas

Mark

42 years of experience
77 reviews
Mark
42 years of experience
Pontiac Vibe L4-1.8L - Power Steering Pressure Hose - Canton, Georgia
Wonderful guy, knows his stuff.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Pontiac Power Steering Pressure Hose Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Replace a Radiator Drain Cock
The radiator drain plug goes bad when the oil pressure is lower than normal, there is leaking coolant, or the Check Engine Light is on.
A Buyer’s Guide to the 2012 Audi A3 TDI
Consumers Consumers steered clear of hatchbacks for a while but Audi has brought a stylish, functional, high-end option into the arena and buyers have responded. The A3 TDI offers all the versatility and performance you expect from Audi in a...
Child Seat Safety Laws in New Mexico
In In New Mexico, there are laws governing child seat restraints, and requiring that every occupant of a vehicle must be properly restrained. This means adults and children alike. The laws in New Mexico are not all that strict when...

My car has entertainment system, current DVD player is not accepting USB devices. Can I change DVD player which takes USB device?

Hello - there are no apparent replacement DVD or infotainment packages available for this model yet - at least through normal audio aftermarket channels like Crutchfield, et al. Keep after Acura Customer Service. The auto makers have much longer development...

When your power steering line that runs to the rack is stuck and will not turn with a wrench at all how do you remove ? 2004 Kia R

I would recommend first removing the power steering pump. Then pull the power steering pump away from the engine as far as the connected power steering line will allow. Then I would use a torch on the flare nut of...

Smaller serpentine belt shredded and pieces went into the crank shaft Tried to start timing jumped. How do I fix? 05' kia op 2.4L

The KIA 2.4 liter motor is what is called an interference motor and this means it will bend valves if the timing belt breaks or jumps timing. You will need to have cylinder head removed and bent valves replaced if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com