Pontiac 6000 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Pontiac 6000 Front Crankshaft Seal Replacement is $159 with $19 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Pontiac 6000L4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$244.70Shop/Dealer Price$260.18 - $296.09
1991 Pontiac 6000L4-2.5LService typeFront Crankshaft Seal ReplacementEstimate$232.99Shop/Dealer Price$246.17 - $280.36
1990 Pontiac 6000V6-3.1LService typeFront Crankshaft Seal ReplacementEstimate$189.19Shop/Dealer Price$201.85 - $235.64
1991 Pontiac 6000V6-3.1LService typeFront Crankshaft Seal ReplacementEstimate$189.19Shop/Dealer Price$201.85 - $235.64
Show example Pontiac 6000 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Nolan

31 years of experience
296 reviews
Nolan
31 years of experience
Pontiac 6000 L4-2.5L - Car is not starting Inspection - Tucson, Arizona
very helpful and taught me a lot about my car

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Pontiac 6000 L4-2.5L - Drive Belt Tensioner - Gastonia, North Carolina
Brikkwas on time .did a great job.highly recommend him

Brikk

19 years of experience
389 reviews
Brikk
19 years of experience
Pontiac 6000 L4-2.5L - Drive Belt Tensioner - Gastonia, North Carolina
Went well.but had to call back because of a problem with tension pulleuy

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Pontiac G6 V6-3.5L - Front Crankshaft Seal Replacement - Houston, Texas
Great job

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Pontiac Front Crankshaft Seal Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Install New Rotors
A A brake rotor (https://www.yourmechanic.com/parts/brake-rotor) is one of the key components to helping bring your car to a stop. The brake pads squeeze together against the rotor, which spins with the wheel, to apply friction and stop the rotation of...
P2262 OBD-II Trouble Code: Turbo Boost Pressure Not Detected - Mechanical
P2262 code definition Turbo Boost Pressure Not Detected-Mechanical What the P2262 code means P2262 is an OBD-II generic code. The engine control...
B1926 OBD-II Trouble Code: Air Bag Passenger Pressure Switch Circuit Failure
B1926 means there is a circuit failure for the airbag switch on the passenger side, likely due to bad electrical components or a faulty switch.

Lights not working

Hi. In some vehicles, all these lights are controlled by the dimmer switch. The switch may be part of your headlight switch, or it can just be attached to the headlamp switch. This is something that requires electrical wiring diagrams...

Why did my 2006 Chrysler Pacifica jump 33,000 miles overnight

Hi there: Unless somebody took your car for a worldwide joy-ride in one day (highly unlikely), both issues are most likely caused by a damaged transmission speed sensor (which does control both the odometer and speedometer on your Chrysler Pacifica)....

Took my dodge avenger in for oil change shortly after i heard a ticking a few days later a louder ticking and i’ve replaces the cam shaft and crank shaft and it it still doing it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com