Nissan Pulsar Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Nissan Pulsar Intake Manifold Gaskets Replacement is $378 with $93 for parts and $285 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1983 Nissan PulsarL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$531.95Shop/Dealer Price$608.70 - $771.44
Show example Nissan Pulsar Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(31)

Rating Summary
28
2
0
0
1
28
2
0
0
1

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Nissan Altima L4-2.4L - Intake Manifold Gaskets - Atlanta, Georgia
Tung is very knowledgeable and professional. Great mechanic.

Chet

41 years of experience
491 reviews
Chet
41 years of experience
Nissan Xterra V6-3.3L - Intake Manifold Gaskets - San Diego, California
I had to have the valve cover gaskets replaced on my Nissan Xterra. This is a big job and an expensive one. Chet was professional, friendly and completed a big job in much less time than what was anticipated. He also provided some tips and helped jump start my friend's car when he arrived. Being able to have a mechanic like Chet come to fix my car brought great piece of mind, was convenient and saved me about $200.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Nissan Murano V6-3.5L - Intake Manifold Gaskets - Marietta, Georgia
skilled and very professional

Michael

12 years of experience
65 reviews
Michael
12 years of experience
Nissan Frontier V6-3.3L - Intake Manifold Gaskets - Atlanta, Georgia
Michael was very knowledgeable got the job done in a timely fashion. Overall experience Excellent!

Excellent Rating

(31)

Rating Summary
28
2
0
0
1
28
2
0
0
1
Number of Nissan Intake Manifold Gaskets Replacement services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Subaru Legacy
The The 2012 Subaru Legacy has top safety ratings, symmetrical all-wheel drive, and good fuel economy making it an attractive option for a family sedan. Key Features The Subaru Legacy comes with a 2.5i six speed manual transmission with 170hp....
2012 Volkswagen Jetta vs. 2012 Subaru Forester: Which One Should I Buy?
Mid-size sedans are the realm of small families or commuters who want a slightly larger vehicle than a subcompact or compact car, yet don’t want to fully give up their good gas mileage. The sedan offers more comfort and space...
How to Replace a Crankshaft Position Sensor
The crankshaft position sensor, along with the camshaft sensor, helps the vehicle determine top dead center, among other engine management tasks.

How can I tell if the water pump has been replaced as the previous owner claimed?

Hi, thanks for your question. The best thing to get when purchasing a car are service records. If the seller doesn't have them in hand, you can go to the shop that did the work and they will have records...

General Inspection or Individual Inspections

Hello. Most of the time the 150 point inspection is a visual inspection of most of the mechanical components of the vehicle. This would not be a complete diagnostic. The inspection may include scanning the computer for codes, but that...

When I crank my car it makes a rattling noise from the belt area under the hood. My [battery](/topics-battery-chrysler/) light comes on also

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com