Nissan 710 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(20)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(20)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Nissan 710 Brake Master Cylinder Replacement is $328 with $195 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1974 Nissan 710L4-1.8LService typeBrake Master Cylinder ReplacementEstimate$550.23Shop/Dealer Price$661.54 - $963.97
1977 Nissan 710L4-2.0LService typeBrake Master Cylinder ReplacementEstimate$522.23Shop/Dealer Price$633.56 - $936.01
1975 Nissan 710L4-2.0LService typeBrake Master Cylinder ReplacementEstimate$522.23Shop/Dealer Price$633.56 - $936.01
1976 Nissan 710L4-2.0LService typeBrake Master Cylinder ReplacementEstimate$522.23Shop/Dealer Price$633.53 - $935.95
Show example Nissan 710 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0

Dellano

18 years of experience
509 reviews
Dellano
18 years of experience
Nissan Rogue L4-2.5L - Brake Master Cylinder - Hyattsville, Maryland
Dellano was awesome. He was knowledgeable, courteous, and detailed. He taught me step by step as he worked. He is a brilliant mechanic.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Nissan Frontier V6-3.3L - Brake Master Cylinder - Phoenix, Arizona
Very professional. Made every effort to solve my issue.

Ronald

41 years of experience
301 reviews
Ronald
41 years of experience
Nissan Altima V6-3.5L - Brake Master Cylinder - Spring, Texas
Ronald was very courteous and friendly. He has great knowledge about his craft.

Claud

8 years of experience
475 reviews
Claud
8 years of experience
Nissan Xterra V6-3.3L - Brake Master Cylinder Replacement - Southgate, Michigan
on time very professional

Excellent Rating

(20)

Rating Summary
20
0
0
0
0
20
0
0
0
0
Number of Nissan Brake Master Cylinder Replacement services completed
220+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

What Does a Catalytic Converter Do?
The The modern automotive exhaust system is much more advanced than what was available even just a couple of decades ago. After recognizing that the average automobile was one of the primary sources of global pollution, the US government enacted...
How to Buy Good Quality Battery Cables
When When your car won’t start, it’s easy to immediately jump to the battery as the problem. If a voltage test, however, shows that the battery is fine, the issue could very well be the battery cables. These oft-overlooked components...
How to Prepare for the Texas Driver’s Written Test
You You can’t wait to get behind the wheel and out on the open road, but you still have to jump a few hurdles before you can get there. Namely, you need to pass your Texas driver’s written test so...

Van shaking and misfiring.

Hello, a P0300 is a general misfire code without pointing to any one cylinder. There should be more codes present indicating which cylinder(s) have a misfire condition. You are correct in stating that a misfire is a combustion concern. To...

98 zj 5.2 v8 with coolant leak but not overheating

The only way to make sure where it is leaking is to put pressure on the cooling system and then visual check the entire system to locate the leak. The water pump is the most common cause of the leak...

No power. Transmission shifts down and engine revs up but doesn't go anywhere

Hi there. In some cases, what you're describing is caused by a restriction of fluid inside the hydraulic lines of the transmission, an inner seal that is damaged or the torque converter wearing out. This issue can sometimes be resolved...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com