logo

Mercury Monarch Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(12)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercury Monarch Control Arm Assembly Replacement is $174 with $79 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1976 Mercury MonarchL6-4.1LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$273.31Shop/Dealer Price$322.89 - $449.13
1975 Mercury MonarchL6-4.1LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$429.87Shop/Dealer Price$523.61 - $782.28
1977 Mercury MonarchL6-3.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$429.87Shop/Dealer Price$523.61 - $782.28
1979 Mercury MonarchV8-5.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$253.31Shop/Dealer Price$302.89 - $429.12
1975 Mercury MonarchL6-3.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$321.47Shop/Dealer Price$388.12 - $565.51
1977 Mercury MonarchL6-3.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
1976 Mercury MonarchL6-3.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$258.31Shop/Dealer Price$307.77 - $433.92
1977 Mercury MonarchL6-4.1LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$368.71Shop/Dealer Price$446.14 - $655.38
Show example Mercury Monarch Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mercury Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(12)
Rating Summary
11
1
0
0
0
11
1
0
0
0

Matthew

33 years of experience
1210 reviews
Request Matthew
Matthew
33 years of experience
Request Matthew
by JiWoong
Mercury Mountaineer V8-4.6L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Hampton, Virginia
Awesome service, quick and clean even after the repair. I will definitely ask my next service to him.

Jacob

12 years of experience
329 reviews
Request Jacob
Jacob
12 years of experience
Request Jacob
by Bethany
Mercury Milan V6-3.0L - Control Arm Assembly Replacement (Front Upper Right, Front Lower Right) - Irving, Texas
Great to work with!! Showed up early and go right to it. Made sure to keep us informed of any changes to the services. Will definitely book him again.

Jonathan

13 years of experience
171 reviews
Request Jonathan
Jonathan
13 years of experience
Request Jonathan
by Patricia
Mercury Milan L4-2.3L - Control Arm Assembly Replacement (Front Lower Left) - Attleboro, Massachusetts
Jonathan was on time, very nice, knowledgeable, and went above and beyond to get my car fixed. He was out in wet crappy weather but kept a smile the whole time.

Chuck

10 years of experience
347 reviews
Request Chuck
Chuck
10 years of experience
Request Chuck
by Bethany
Mercury Milan V6-3.0L - Control Arm Assembly Replacement (Front Upper Left, Front Lower Left) - Irving, Texas
Very informative and efficient. Will definitely use again!

Excellent Rating

(12)
Rating Summary
11
1
0
0
0
11
1
0
0
0
Number of Mercury Control Arm Assembly Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

How to Register a Car in Idaho
Register your car at the Idaho DMV within 90 days. The cost is $14-$62. Provide proof of car insurance, personal identification, and a VIN inspection.
Read more
How to Prevent Having Your Car Stolen
Protecting Protecting your vehicle from auto thieves can save you the hassle of trying to recover a stolen car or from having to buy another to replace it. You can choose from many options to protect your vehicle, including using...
Read more
Insurance Requirements For Car Registration in All States
Car insurance is mandatory when registering a vehicle. Find out what the insurance requirements are in your state or when traveling to another state.
Read more

hydraulic clutch stuck in gear

Hello. I suggest checking the shift linkages and the hydraulics of the clutch system. When putting the engine back in, the shift linkages may have been put back out of adjustment, or air could have been trapped in the clutch fluid. Bleeding...
Read more

Brake dash light comes on and off.

This year model of vehicle does have several caliper applications depending on specifics such as a 15" tire, 16" , whether is has rear drum and so forth and they all may bolt up in a similar way, but do...
Read more

How do I fix O2 sensor heater cylinders 1-6 circuit malfunction?

The oxygen sensor heater is integral to the sensor assembly itself. It is not separately serviceable. If the heater tests bad, the entire sensor is replaced as an assembly. In your case, P1193 refers to an oxygen sensor which is...
Read more
  1. Home
  2. Estimates
  3. Mercury
  4. Monarch
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE