Mercedes-Benz R500 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz R500 Power Steering Pressure Hose Replacement is $426 with $274 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Mercedes-Benz R500V8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$731.34Shop/Dealer Price$896.19 - $1327.71
2006 Mercedes-Benz R500V8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$699.34Shop/Dealer Price$864.24 - $1295.80
Show example Mercedes-Benz R500 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz R500 V8-5.0L - Brake Pads Replacement (Front) - Clinton, Maryland
Wonderfuj! Richard was very professional and courteous and explained everything he had done upon completion of the job. I was very satisfied as I was the first time I use Richard.

Dellano

18 years of experience
509 reviews
Dellano
18 years of experience
Mercedes-Benz R500 V8-5.0L - Car is not starting - Hyattsville, Maryland
Dellano made the necessary checks to the car and determined that the reason for the battery drainage is due to a lack of driving

Joseph

27 years of experience
578 reviews
Joseph
27 years of experience
Mercedes-Benz R500 V8-5.0L - Stabilizer Bar Links Replacement (Front) - Houston, Texas
Great guy and mechanic.

Jamie

26 years of experience
30 reviews
Jamie
26 years of experience
Mercedes-Benz R500 V8-5.0L - Starter - North Charleston, South Carolina
Fantastic! Prompt and courteous. Completed job competently, reinstalled my battery and carpet without complaint and cleaned up the area. I would recommend him to anyone who needs service.

Excellent Rating

(10)

Rating Summary
9
0
0
0
1
9
0
0
0
1
Number of Mercedes-Benz R500 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0215 OBD-II Trouble Code: Engine Shutoff Solenoid Malfunction
P0215 P0215 Code Definition Engine shutoff solenoid malfunction What the P0215 code means The P0215 code means that the solenoid responsible for shutting off the engine or the crankshaft position sensor has an issue. What are the causes of the...
P2110 OBD-II Trouble Code: Throttle Actuator Control System Forced Limited RPM
P2110 P2110 trouble code definition Throttle Actuator Control System Forced Limited RPM What the P2110 code means P2110 is an OBD-II generic code for the engine control module (ECM) detecting a major failure in the throttle actuator control (TAC) system...
Rules of the Road For Hawaii Drivers
While While you may be comfortable with the rules for driving on the roads in your own state, they may not be the same when you go to another state. If you are planning on visiting or moving to Hawaii,...

My slip indicator light is on all the time. I just had the car serviced and tires rotated. Why would the slip indicator stay on?

Hi there. The Slip indicator light should blink at certain times. If the vehicle stability control system is operating (actively assisting with handling), you’ll see the Slip indicator light blink. This should also be taken as a warning that the...

What's the average cost with labor to repair a throttle body on a chrysler 200

Hi there. It really depends on what exactly you need replaced; or what's wrong with the throttle body or fuel system. If it's the electronic throttle controller (https://www.yourmechanic.com/services/throttle-controller-replacement) then the replacement cost can range from $300 to $1,500 depending on...

I have a 2007 Buick Lucerne an I turned the car on to warm up an it started to Idol on its own on the dashboard it said the the en

The issue you are writing in about is common enough that a specific diagnostic, namely a reduced engine power diagnostic (https://www.yourmechanic.com/services/reduced-power-light-is-on-inspection) is performed by technicians dispatched by YourMechanic. If you request that diagnostic, the responding certified mechanic will get this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com