Mercedes-Benz C32 AMG Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Mercedes-Benz C32 AMG Power Steering Pressure Hose Replacement is $514 with $410 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz C32 AMGV6-3.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$946.05Shop/Dealer Price$1178.44 - $1813.74
2004 Mercedes-Benz C32 AMGV6-3.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$943.05Shop/Dealer Price$1180.50 - $1819.59
2003 Mercedes-Benz C32 AMGV6-3.2L TurboService typePower Steering Pressure Hose ReplacementEstimate$943.05Shop/Dealer Price$1180.49 - $1819.58
Show example Mercedes-Benz C32 AMG Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Fuel Filter Replacement - Winchester, California
Chris arrived and replaced the fuel filter flawlessly.

Michael

27 years of experience
478 reviews
Michael
27 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Serpentine/Drive Belt - Mesa, Arizona
Great service and knowledge of Mercedes-Benz vehicles. If you need the job done right don't hesitate to ask for Michael.

Joe

15 years of experience
453 reviews
Joe
15 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Car is making a noise - Nashville, Tennessee
Joe is very friendly and professional, went above and beyond to address my car service needs.

James

31 years of experience
684 reviews
James
31 years of experience
Mercedes-Benz C32 AMG V6-3.2L Turbo - Car is not starting - Cypress, California
He came prepared and came early. Did a lot of tests and discovered that I needed a fuel pump along with some other repairs.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Mercedes-Benz C32 AMG services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Cell Phones and Texting: Distracted Driving Laws in Ohio
Ohio Ohio has similar cell phone and texting laws to other states in the nation. Texting is illegal for drivers of all ages. Drivers under the age of 18 are not allowed to use a cell phone at all while...
The Guide to Legal Car Modifications in Delaware
ARENA Creative / Shutterstock.com Delaware regulates the modifications that you can make to your vehicle. If you live in the area or are planning to move to the state, make sure your vehicle is street legal by...
How to Check Car Fluids
Maintaining your car involves checking essential fluids. Check the engine oil, coolant, brake fluid, power steering fluid, and windshield fluid.

How do I adjust the head restraints?

Head restraints are important safety features that protect your head and neck in an accident. The head restraints should always be adjusted when you get in the vehicle. To raise the head restraints, simply lift them straight up. To lower...

ABS light coming on

It is very possible that you may have a wheel speed sensor that is going bad. That is the most common problem to turn the ABS light on. There could also be some damaged wiring but it also may be...

Information about Techron

Techron is a product made by Chevron that is a cleaner. It's a very good cleaner and it cleans fuel injection systems. It's basically a nitrogen-based cleaner that works very good on modern cars. A lot of companies use them...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com