Jeep J-3500 Engine is misfiring Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(21)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(21)

Engine is misfiring Inspection Service

How much does a Engine is misfiring Inspection cost?

On average, the cost for a Jeep J-3500 Engine is misfiring Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1970 Jeep J-3500V8-5.3LService typeEngine is misfiring InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1965 Jeep J-3500V8-5.3LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1969 Jeep J-3500V8-5.3LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1968 Jeep J-3500L6-3.8LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1966 Jeep J-3500V8-5.3LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1969 Jeep J-3500V8-5.7LService typeEngine is misfiring InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1968 Jeep J-3500V8-5.4LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1967 Jeep J-3500V8-5.3LService typeEngine is misfiring InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Jeep J-3500 Engine is misfiring Inspection prices

When an engines misfires, it’s usually readily apparent to the driver from the stuttering and jerking produced by the engine when one or more cylinders fails to fire properly, either because of ignition- or fuel-related issues. It is accompanied by a loss of power in direct proportion to the severity of the misfire.

It can be tricky for to track down the problem if the misfire only occurs under certain circumstances, for example, under load. Not all misfires occur across the operating spectrum.

For older vehicles:

On older, carbureted vehicles, the culprit will almost certainly be in the ignition system as older vehicles lack many of the sophisticated sensors that can cause a misfire. A vacuum leak or a faulty fuel pump can also cause this symptom as well. The first thing the mechanic will do is determine which cylinder or cylinders is misfiring, and the spark plug color is probably the best way to tell. The guilty plug will most likely be grayer than the others, which should tend toward brown coloring. If needed, the spark plug can be replaced.

The next step would be checking the wiring to that plug for cracks and deterioration, and replace as necessary.

For most modern vehicles:

In modern cars, misfiring will invariably be accompanied by a Check Engine light. In fact, checking for efficient combustion was the primary reason the U.S. government introduced the rules for OBD-II (on-board diagnostics, second generation). It was part of the push toward cleaner exhaust emissions.

A code reader will tell you which cylinder is to blame, but it may not say whether it is a problem relating to the injector serving that cylinder or the systems delivering the ignition spark. As with older vehicles, a look at the wires and spark plugs is a good idea. Checking them in the dark will sometimes reveal errant spark tracking, as will spraying them with a fine water mist.

One way mechanics check which spark plug is failing to hold its own is by running the engine at an idle speed high enough to produce the misfire, then removing leads from the coilpack (the unit that looks like the distributor we are used to seeing in older vehicles ) one by one. Most removals will cause a profound change in idling performance, but a defective wire will not. That will suggest that it’s either the spark plug or the coil serving that cylinder at fault. If a new spark plug at that cylinder does not remove the stumble, the mechanic may need to replace the coil pack or the wires as a set.

If it isn’t an ignition issue, then the injectors will need to be checked. A mechanic uses a multimeter to check the resistance value at each injector. It may be a bit difficult to reach them, sometimes requiring the removal of an engine cover and the intake manifold. The mechanic disconnects the injector, then touches the multimeter probes to the two connector prongs to read the value, in Ohms. If any of the injectors read outside of the specified values, they will need to be replaced.

Along the same lines, a fuel pump starting to go bad can also cause misfires or similar issues and can be diagnosed with a fuel pressure check of the entire system with the appropriate equipment. This should only be done by a qualified mechanic as the fuel system is highly pressurized and of course, fuel is flammable.

Common reasons for this to happen:

  • Faulty spark plugs or wires
  • Faulty ignition coil
  • Broken piston rings
  • Burnt or bent valves
  • Broken valve springs
  • Camshaft worn out
  • Fuel injector is not working

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the misfiring engine, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A misfiring engine is accompanied by a loss of power, which makes this issue a critical one to correct promptly. Book a mechanic to perform a thorough inspection as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(21)

Rating Summary
19
2
0
0
0
19
2
0
0
0

Chris

16 years of experience
419 reviews
Chris
16 years of experience
Jeep Cherokee L6-4.0L - Engine is misfiring - San Francisco, California
Chris provided some excellent direction on how to proceed with the rebuild; his help was invaluable.

Rodric

14 years of experience
417 reviews
Rodric
14 years of experience
Jeep Liberty V6-3.7L - Engine is misfiring - Atlanta, Georgia
Rodric did an excellent job!!! I'm very pleased!

Steve

40 years of experience
105 reviews
Steve
40 years of experience
Jeep Wrangler L6-4.0L - Engine is misfiring - West Palm Beach, Florida
Awesome guy to work with, knows his stuff, would recommend to anyone!

James

15 years of experience
46 reviews
James
15 years of experience
Jeep Commander V6-3.7L - Engine is misfiring Inspection - Gardena, California
Excellent service! Great knowledge of the trade. Quickly diagnosed problem and corrected it. Strongly Recommend

Excellent Rating

(21)

Rating Summary
19
2
0
0
0
19
2
0
0
0
Number of Jeep Engine is misfiring Inspection services completed
231+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Clean Leather Car Seats
A A leather interior (https://www.yourmechanic.com/article/how-to-clean-the-inside-of-your-car_2) can be an expensive option on a vehicle and protecting it should be a priority. Leather seats will last the lifetime of the car if properly cleaned and cared for on a regular basis. Unfortunately,...
P0775 OBD-II Trouble Code: Pressure Control Solenoid B Malfunction
P0775 means there is insufficient fluid pressure within a solenoid operating the automatic transmission due to leaks, low or dirty fluid.
How to Replace the Downshift Solenoid in Your Car
Downshift solenoids in your transmission give you a seamless experience when braking, and are important to make sure brakes always work properly.

How do you check the engine oil?

Checking the level of oil in the engine is a critical part of general maintenance and something that you should do regularly (with every fill-up, ideally). Here’s how to do it the right way: Park so the car is level....

Car shakes and starts to die while idling

The battery dying is it’s own issue. It could be the battery itself, the charging system, or an electrical drain when the key is off. All of these will need tested to find the culprit. The engine running poorly and...

How much to flush out system cause car has no heat

The heater core being plugged is not the most common cause for this vehicle to not give heat out of the vents. If you move controls to heat and do not notice a temperature change when turned hotter the most...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com