Jeep J-310 Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6,592)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6,592)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Jeep J-310 Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1965 Jeep J-310V8-5.3LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1964 Jeep J-310L6-3.8LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1965 Jeep J-310L6-3.8LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1963 Jeep J-310L6-3.8LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Jeep J-310 Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96

Steven

21 years of experience
200 reviews
Steven
21 years of experience
Jeep Wrangler V6-3.8L - Spark Plug Replacement - Weatherford, Texas
Steven got here early and did a great job, in the freezing cold at that. He is an honest and hardworking mechanic who I would trust to work on my cars in the future.

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Jeep Liberty V6-3.7L - Creaking noise when turning the steering wheel - Houston, Texas
Ben was on time and extremely thorough. I am impressed by the level of detail taken during the diagnostic visit and everything was emailed to me in a very timely manner. He was pleasant and knowledgeable to speak with. I highle recommend this service.

Robert

20 years of experience
1098 reviews
Robert
20 years of experience
Jeep Wrangler V6-3.6L - Pre-purchase Car Inspection - Denver, Colorado
Very patient, thorough and explained and offered his expertise! Thank you!

Scott

34 years of experience
551 reviews
Scott
34 years of experience
Jeep Grand Cherokee L6-4.0L - Oil/Fluid Leak - Denver, Colorado
Scott made sure I understood recommendations and was very professional.

Excellent Rating

(6,592)

Rating Summary
6,251
185
36
24
96
6,251
185
36
24
96
Number of Jeep services completed
72512+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Find Out Which License Plates are Available in Your State
When When you register your vehicle, you get a license plate. Unless you specify otherwise, you will get the standard, generic license plate for your state. However, most states have numerous options for fun, specialized license plates. Some of these...
P2126 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch E Circuit Range/Performance
Diagnostic Diagnostic Trouble Code (DTC): P2126 P2126 code definition Throttle/Pedal Position Sensor/Switch E Circuit Range/Performance Related Trouble Codes: P2120: Throttle/Pedal Position Sensor/Switch D Circuit P2121: Throttle/Pedal Position Sensor/Switch D Circuit Range/Performance P2122: Throttle/Pedal Position Sensor/Switch D Circuit Low Input P2123:...
What are the Car Pool Rules in Tennessee?
Tennessee Tennessee is home to a few large metropolitan areas, and every day countless numbers of workers commute into and out of Nashville, Memphis, and other Tennessee cities and their way to and from work. Most of these workers rely...

How do you open the gas cap?

Your car is equipped with a locking fuel door to prevent anyone but you from removing the gas cap (for fuel siphoning). Here’s how to open the fuel door and get the gas cap off: Make sure you’re stopped. Roll...

My engine is knocking.

The noise you are hearing is a pretty common issue in these engines. The noise is caused by one or more of the cylinder head camstand cam followers along with the valve springs. This engine has high cam failures and...

My car has no spark - 1992 Audi 100

First thing to check is what diagnostic codes the engine management system contains. Yes, even pre-OBD-II cars can have on-board diagnostics. In the fuse box, there are a pair of 2-pin connectors: one white and one black. With the ignition...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com