Jeep J-100 Tie Rod End Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(24)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(24)

Tie Rod End Replacement Service

How much does a Tie Rod End Replacement cost?

On average, the cost for a Jeep J-100 Tie Rod End Replacement is $178 with $83 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Jeep J-100V8-5.7LService typeTie Rod End - Front Left Inner ReplacementEstimate$287.71Shop/Dealer Price$340.89 - $477.93
1971 Jeep J-100L6-3.8LService typeTie Rod End - Front Right Inner ReplacementEstimate$267.71Shop/Dealer Price$320.91 - $457.96
1972 Jeep J-100V8-5.9LService typeTie Rod End - Rear Right Inner ReplacementEstimate$267.71Shop/Dealer Price$320.91 - $457.96
1973 Jeep J-100V8-5.9LService typeTie Rod End - Rear Right Outer ReplacementEstimate$275.39Shop/Dealer Price$330.49 - $473.28
1969 Jeep J-100L6-3.8LService typeTie Rod End - Rear Right Outer ReplacementEstimate$275.39Shop/Dealer Price$330.52 - $473.35
1972 Jeep J-100V8-5.0LService typeTie Rod End - Rear Right Outer ReplacementEstimate$275.39Shop/Dealer Price$330.51 - $473.32
1971 Jeep J-100V8-5.0LService typeTie Rod End - Rear Left Inner ReplacementEstimate$276.55Shop/Dealer Price$330.57 - $470.40
1966 Jeep J-100L6-3.8LService typeTie Rod End - Front Left Inner ReplacementEstimate$272.71Shop/Dealer Price$326.14 - $463.38
Show example Jeep J-100 Tie Rod End Replacement prices

What are tie rod ends and how do they work?

Your car’s steering rack or gearbox (depending on the vehicle) is bolted in a fixed position to the frame of your vehicle. But the car’s wheels move up and down to smooth out road irregularities, and also left and right as you turn the steering wheel. The tie rod end is connected between the track rod of the steering assembly and the steering knuckle. A tie rod has a ball-and-socket joint to accommodate these movements. Cars will typically have two tie rod ends on each side: one inner tie rod end and one outer tie rod end — four total with a set of two per side. Tie rod ends are usually permanently greased but some may have Zerk fittings for re-greasing, including aftermarket ones. Tie rod ends are adjustable and accuracy is critical for proper front wheel alignment.

When to consider replacing tie rod ends:

  • Vehicle wandering, pulling, or premature tire wear out. Loose tie rod ends may cause the vehicle to not track straight ahead. You may also notice excessive tire wear on the front tires.
  • Missing, damaged, or leaking rubber boot or bellows. The grease in an outer tie rod end is retained by a rubber seal. If the seal has failed, the grease will leak out and the joint will be contaminated and worn down by road dirt. Inner tie rod ends are protected by extensible bellows. If the bellows has torn and is noticed early, only it needs to be replaced.
  • Obvious looseness in the component. Mechanics use specified tests to determine if there is wear in a tie rod end. For example, the resistance to turning of the ball stud in the outer tie rod end can be measured and compared against the original equipment manufacturer’s (OEM) specifications. However, without the use of any instruments, any detectable play in the ball stud indicates the tie rod end must be replaced. Excessive play will also make it impossible to properly set toe alignment.
  • Clunking noises, lack of smooth steering. Noise from the suspension on turning, or binding when you turn the steering wheel, could be due to tie rod end defects. Steering rack or power steering assist problems can account for these problems too.

How do mechanics replace tie rod ends?

  • The vehicle is jacked up and supported on steel safety stands.
  • The tire and wheel assembly is removed.
  • If possible, the existing tie rod end length is measured and recorded. Installing the new tie rod at the same length as the old helps in the alignment process.
  • The tie rod end adjusting lock nut or sleeve is loosened. Then, a tie end removal tool is used to separate the tie rod ball stud from the steering knuckle. The tie rod is then unthreaded from its connection to the inner tie rod end.
  • On a rack and pinion type steering system, if an inner tie rod end is being replaced, the tie rod steering shaft boot is removed and the tie rod unthreaded from the steering rack and the outer tie rod end.
  • New tie rod ends are installed with all fasteners and the adjusting lock nut tightened to the required OEM torque value. During installation, the length recorded during removal is applied to aid the later wheel alignment process.
  • With only a few exceptions, anytime a suspension component is removed and replaced on your car, the vehicle alignment must be inspected, measured, and adjusted to factory specifications. Using portable equipment, some mobile mechanics can perform a mobile alignment at your location. More likely though, the final step will be a trip to a local alignment shop for measurement, and adjustment as needed, of the vehicle alignment.

Is it safe to drive with a tie rod end problem?

No. Tie rods ends are a critical mechanical linkage in the steering system. If a known problem exists, such as wear, looseness, or binding, the possibility of sudden and unpredictable breakage of the tie rod remains, which would cause loss of steering control. Consequently, it is not safe to drive the car if the tie rod ends have a known deficiency. Tie rod ends should always be inspected per the maintenance schedule.

When replacing tie rods keep in mind:

  • It is recommended to replace tie rod ends in pairs. There are four tie rod ends on most vehicles. The outer tie rod ends — one per side — are most susceptible to wear and failure. If one outer tie rod end has failed, the other is probably not far behind.
  • After the repair is performed the vehicle must be aligned, either on a mobile basis or at a good alignment shop.
  • A good alignment job will provide you with pre and post-alignment printouts of your car’s alignment settings. A good shop will set the alignment to the “preferred” factory setting, not just the “allowed” settings. A job well-done will also have performed a careful inspection of the suspension beforehand to ensure the new alignment remains durable and stable. The best alignment results will be achieved if the tires on your car are not unevenly worn.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(24)

Rating Summary
22
0
0
0
2
22
0
0
0
2

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
Jeep Commander V8-4.7L - Tie Rod End Replacement (Front Right Outer) - Lynnwood, Washington
Theodore was on time and and informative of what he was doing. He did great work and had excellent customer service. I will be requesting his services again.

Andrew

11 years of experience
849 reviews
Andrew
11 years of experience
Jeep Grand Cherokee V8-4.7L - Tie Rod End Replacement (Front Left Inner, Front Right Inner, Front Left Outer, Front Right Outer) - Lees Summit, Missouri
Always a pleasure knowing my car is in good hands.

Jonathan

35 years of experience
486 reviews
Jonathan
35 years of experience
Jeep Grand Cherokee V8-4.7L - Tie Rod End Replacement (Front Left Outer, Front Right Outer) - Tampa, Florida
Nice guy diagnose and fixed in a timely manner

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Jeep Patriot L4-2.0L - Tie Rod End Replacement (Front Right Inner, Front Right Outer) - Spring, Texas
Great job by Breck. This was my first time using Your Mechanic and I was blessed to get Breck. For a first timer, Breck’s warm personality and focus on the job inspired confidence. Looking forward to having him back for tune-up on the same vehicle later this week.

Excellent Rating

(24)

Rating Summary
22
0
0
0
2
22
0
0
0
2
Number of Jeep Tie Rod End Replacement services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

What Fees Come With Buying a New Vehicle?
Fees that come with buying a new car vary depending on where you buy the vehicle. Common extras include a prepaid maintenance plan and paint sealant.
How Long Does a Pinion Shaft Oil Seal Last?
In In a rear-wheel drive vehicle, the transmission’s power must be transmitted from the front of the vehicle to the rear wheels. This is done using a driveshaft – a long metal shaft that attaches to the end of the...
The Best Tool to Heat Up Rusted or Seized Parts
A micro torch is a great addition to a mechanic's tool box. It can clean rust that has built up in various parts of a car.

How do I open the power liftgate

If the power liftgate is turned on to MAX or ¾ setting, then you can open the trunk automatically. There are three different ways to use the power liftgate: 1. With the remote keyless entry (RKE) transmitter. Press the unlock...

im having trouble looking for a replacement Trans for my Chevy Impala 2006 police pack 3.9l any other transmission i can use?

Hi Johnatan. Thanks for contacting us today. It's recommended to replace any OEM transmission with the same type of system from the same year, make and model of vehicle. You might find luck with a local transmission shop or ask...

Installed mew battery in 06 trailblazer now it wont start it cranks but wont start

This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination of both....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com