Jeep J-100 Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Jeep J-100 Brake Master Cylinder Replacement is $267 with $172 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Jeep J-100V8-5.4LService typeBrake Master Cylinder ReplacementEstimate$458.03Shop/Dealer Price$553.79 - $818.57
1973 Jeep J-100L6-4.2LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.81 - $798.60
1963 Jeep J-100L6-3.8LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.81 - $798.60
1971 Jeep J-100L6-3.8LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.79 - $798.56
1968 Jeep J-100V8-5.3LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.82 - $798.63
1971 Jeep J-100V8-5.0LService typeBrake Master Cylinder ReplacementEstimate$438.03Shop/Dealer Price$533.81 - $798.60
1971 Jeep J-100V8-5.7LService typeBrake Master Cylinder ReplacementEstimate$443.03Shop/Dealer Price$538.67 - $803.36
1967 Jeep J-100V8-5.3LService typeBrake Master Cylinder ReplacementEstimate$443.03Shop/Dealer Price$539.04 - $804.02
Show example Jeep J-100 Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Jeep Wrangler L6-4.0L - Brake Master Cylinder - Gilroy, California
Jason is Amazing. He always gives me the full description of what is wrong and what he is going to do to fix my issues. His work is GREAT!! and he always leaves my cars cleaner then when he started working. I would recommend Jason to anyone. Great customer service.

Tim

48 years of experience
73 reviews
Tim
48 years of experience
Jeep Grand Cherokee V8-4.7L - Brake Master Cylinder - Cedar Park, Texas

John

27 years of experience
45 reviews
John
27 years of experience
Jeep Wrangler L6-4.2L - Brake Master Cylinder - Jupiter, Florida
John was fantastic! Great communication, helped me troubleshoot the original issue over the phone so when he arrived he was able to get working on the appropriate issue right away. Even battled some weather to get the job done. Highly recommend John!

Curtis

29 years of experience
163 reviews
Curtis
29 years of experience
Jeep Wrangler L6-4.0L - Brake Master Cylinder - Augusta, Georgia
Great Job and very Professional, will be using his services from now on.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Jeep Brake Master Cylinder Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

How Long Does a Cruise Control Clutch Release Switch Last?
The The cruise control clutch release switch is only located on manual transmission vehicles. These vehicles have a clutch pedal, is depressed. The cruise control works on a circuit system. If the clutch pedal is not pressed in at all,...
Summertime Do’s and Don’ts For Your Car or Truck
Waxing your paint, watching for overheating, keeping the fuel tank full, and turning the A/C off in very hot weather will help keep your car happy.
Summertime Road Trip Checklist
Stay cool on road trips in hot weather by maintaining your car air conditioning, carrying water bottles, and checking road conditions.

How does the automatic climate control system work?

If your vehicle includes an automatic climate control system (higher end trims only), you have the ability to “set it and forget it” when it comes to heating and cooling. Using the system is simple, too. Here’s what you need...

Brakes locked up

When the rotors get this hot, this is usually an indication that the brake pads (https://www.yourmechanic.com/services/brake-pads-replacement) are dragging on the rotors. This can happen when the brake calipers (https://www.yourmechanic.com/services/brake-caliper-replacement) are misaligned on the rotors. This problem is often compounded when,...

Service Wrench light on Ford Edge 2007 what we need to do?

Hello. The wrench means that your vehicle needs service. This can be as simple as needing an oil change (https://www.yourmechanic.com/services/change-oil-and-filter). The system will need to be scanned for codes to be able to tell for sure what is going on....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com