Jeep FA-134 Stabilizer Bar Bushings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Stabilizer Bar Bushings Replacement Service

How much does a Stabilizer Bar Bushings Replacement cost?

On average, the cost for a Jeep FA-134 Stabilizer Bar Bushings Replacement is $107 with $12 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1960 Jeep FA-134L4-2.2LService typeStabilizer Bar Bushings - Rear ReplacementEstimate$139.73Shop/Dealer Price$155.92 - $181.97
1960 Jeep FA-134L4-2.2LService typeStabilizer Bar Bushings - Front ReplacementEstimate$143.93Shop/Dealer Price$166.18 - $210.40
Show example Jeep FA-134 Stabilizer Bar Bushings Replacement prices

What are stabilizer bar bushings and how do they work?

Stabilizer bar bushings are rubber bushings designed to isolate the steel stabilizer bar from the vehicle frame and suspension. The stabilizer bar itself is typically connected to the lower control arms or another suspension component. Through a twisting action, the bar counteracts vehicle lean as you turn around a corner. Cars may be equipped with just a front stabilizer bar or both front and rear stabilizer bars.

When to consider replacing stabilizer bar bushings:

  • Knocking, clunking, grinding or squeaking noises. If a bushing has failed, the type of noise you hear depends on the location and extent of the failure. Complete loss of the bushing will cause metal-to-metal contact; you might hear clunking or grinding. If the bushing has dried out and is hard, you might hear squeaking.
  • Visible physical damage. On visual inspection, the bushings may be cut, abraded, dislodged, loose, or even missing.

How do mechanics replace stabilizer bar bushings?

  • Raise and support the vehicle using steel safety stands
  • Remove tire and wheel assemblies on both ends of the axle.
  • Detach stabilizer bar bushing clamp, or stabilizer bar link, depending on the location of the bushing to be replaced. Often, if the stabilizer bushing to the vehicle frame mount is being replaced, the stabilizer bar must be completely detached at all links for there to be enough space to install the new frame bushings.
  • Once all bushings and required hardware are replaced, the bushing mounts are tightened with a load on the suspension. If required by the service manual, this step ensures the bushings will be in an unloaded condition and not pinched when the vehicle is sitting at normal ride height.
  • The vehicle is lowered and road tested to ensure normal cornering; meaning body lean within acceptable limits and without noise.

Is it safe to drive with a stabilizer bar bushings problem?

Yes. Although not a severe threat, aside from the likely presence of noise, operation at highway speeds when performing sudden maneuvers can be affected — especially if the vehicle is carrying a heavy load. Seek repair at your earliest convenience.

When replacing stabilizer bar bushings keep in mind:

  • The mechanic will inspect the stabilizer bar itself for corrosion, cracks and accident damage.
  • Bushings are sold in pairs because it is recommended they be replaced in pairs.
  • Always have all bushings inspected, including the bushings in the stabilizer bar links, even if just the stabilizer bar frame mount bushings are replaced.
  • Removal and re-attachment of the stabilizer bar, and replacement of the bushings, normally has no effect on wheel alignment.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0

Scott

34 years of experience
560 reviews
Scott
34 years of experience
Jeep Commander V8-5.7L - Stabilizer Bar Bushings Replacement (Front) - Denver, Colorado
timely and explained well the issue

Nathan

21 years of experience
298 reviews
Nathan
21 years of experience
Jeep Grand Cherokee V8-4.7L - Stabilizer Bar Bushings Replacement (Front, Rear) - Austin, Texas
Nathan's a great guy. Very thorough and works quickly. Definitely recommend his service!

Derrick

20 years of experience
109 reviews
Derrick
20 years of experience
Jeep Grand Cherokee V8-5.7L - Stabilizer Bar Bushings Replacement (Front) - Brooklyn, New York
quick & good work

Mark

25 years of experience
55 reviews
Mark
25 years of experience
Jeep Grand Cherokee V8-4.7L - Stabilizer Bar Bushings Replacement (Front) - Glendale, Arizona
Very knowledgeable. He answered all my questions in terms I could understand. I was very happy with his work.

Excellent Rating

(7)

Rating Summary
6
1
0
0
0
6
1
0
0
0
Number of Jeep Stabilizer Bar Bushings Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

Windshield Laws in South Dakota
If If you are a licensed driver in South Dakota, you already know about the numerous traffic laws you have to follow when navigating the roadways. However, there is much more to the rules of the road that just your...
P2442 OBD-II Trouble Code: Secondary Air Injection System Switching Valve Stuck Open Bank 2
P2442 P2442 code definition The P2442 code is a generic powertrain code related to the auxiliary emissions control system. This particular code appears when the bank 2 secondary air injection valve stays open. The P2442 code is also related to:...
10 Best Stores to Buy Auto Parts in Hartford, Connecticut
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Hartford is Napa Auto Parts.

Central locking is no longer working.

It sounds like your vehicle has a problem with the body control module, mainly because you said the power locks are also inoperative from the door panel. The first thing I would suggest is to check the fuses (https://www.yourmechanic.com/article/how-to-check-fuses-by-rocco-lovetere), then...

My Oil Pressure Light blinks when I come to a stop. What's wrong?

This is likely a sign of low oil pressure, which is usually caused by a leak or low oil levels. I would start by checking your oil to be sure the oil level is at the appropriate capacity. You should...

I don't know how to turn on my fog lights.

The fog light switch (https://i.ytimg.com/vi/77zyWjp4YPU/hqdefault.jpg) is on the left turn signal lever close to steering column the lever rotates to turn on the fog lights.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com