Isuzu Amigo Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Isuzu Amigo Power Steering Pressure Hose Replacement is $243 with $103 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Isuzu AmigoL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$573.82Shop/Dealer Price$682.13 - $998.94
1998 Isuzu AmigoV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$564.81Shop/Dealer Price$671.35 - $986.84
1990 Isuzu AmigoL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$710.53Shop/Dealer Price$853.52 - $1278.32
1992 Isuzu AmigoL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$710.53Shop/Dealer Price$853.52 - $1278.32
2000 Isuzu AmigoL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$564.81Shop/Dealer Price$672.85 - $989.46
1999 Isuzu AmigoL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$564.81Shop/Dealer Price$671.51 - $987.13
1999 Isuzu AmigoV6-3.2LService typePower Steering Pressure Hose ReplacementEstimate$351.85Shop/Dealer Price$405.19 - $560.99
1993 Isuzu AmigoL4-2.6LService typePower Steering Pressure Hose ReplacementEstimate$710.53Shop/Dealer Price$853.52 - $1278.32
Show example Isuzu Amigo Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Shawn

24 years of experience
227 reviews
Shawn
24 years of experience
Isuzu Amigo V6-3.2L - Spark Plugs - Newport News, Virginia
Very professional, knowledgeable, respectful and polite.

James

31 years of experience
1039 reviews
James
31 years of experience
Isuzu Amigo V6-3.2L - Alternator - Apopka, Florida
Arrived on time! Surmised problem correctly and started work immediately. Replaced alternator with minimal problems. Safety check and inspections completed. 5 Stars professional service. Completely satisfied and will utilize James again. Thanks so much, JV

Timothy

23 years of experience
107 reviews
Timothy
23 years of experience
Isuzu Amigo V6-3.2L - Intake Manifold Gaskets - Puyallup, Washington
Very knowledgeable, communicates if running late, overall great guy, would recommend

Miguel

36 years of experience
258 reviews
Miguel
36 years of experience
Isuzu Amigo L4-2.6L - Oxygen Sensor Replacement (Front/Upper/Upstream) - Jacksonville, Florida
awesome work

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Isuzu Amigo services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Pennsylvania
If If not for right-of-way laws, traffic would be utter mayhem. Who goes first? Who goes next? Can we simply rely on common courtesy and good sense? No, of course we can’t because not everyone is courteous or sensible. Fortunately,...
P0075 OBD-II Trouble Code: Intake Valve Control Solenoid Circuit (Bank 1)
P0075 P0075 code definition Intake Valve Control Solenoid Circuit (Bank 1) What does the P0075 code mean? The P0075 code varies by manufacturer, but it is a general powertrain trouble code for 1996 and newer cars with Variable Valve Timing...
P0262 OBD-II Trouble Code: Cylinder 1 Injector Circuit High
P0262 means the number 1 cylinder is experiencing a draw that’s above average due to a dirty, plugged or shorted fuel injector, or electrical issues.

Overheating on short trips. 2000 Chevrolet Metro

Hello. There could be a problem with the water pump (https://www.yourmechanic.com/services/water-pump-replacement) not pumping the water as efficiently as it should. This is a common problem with these cars. If the thermostat is faulty this could also cause the car to...

Having problems starting the car.

Hello, it takes 3 things to make a car run, air, spark and fuel. It sounds like it is taking a while to get fuel or its losing fuel pressure. This could be a sign that the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement)...

My car is making a knocking noise - 1986 Oldsmobile Delta 88

The first concern is your oil system. Do you have full and clean oil in the vehicle? If the fluid is low, or there is an oil leak, the vehicle will have low oil pressure at idle. When the engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com