Infiniti J30 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Infiniti J30 Front Crankshaft Seal Replacement is $1113 with $469 for parts and $644 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Infiniti J30V6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1677.76Shop/Dealer Price$1947.93 - $2693.24
1995 Infiniti J30V6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1636.31Shop/Dealer Price$1892.26 - $2626.90
1993 Infiniti J30V6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1610.05Shop/Dealer Price$1859.65 - $2574.75
1994 Infiniti J30V6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1826.10Shop/Dealer Price$2086.47 - $2824.43
1996 Infiniti J30V6-3.0LService typeFront Crankshaft Seal ReplacementEstimate$1636.31Shop/Dealer Price$1904.32 - $2648.00
Show example Infiniti J30 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Infiniti mechanics

Real customer reviews from Infiniti owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Andy

5 years of experience
73 reviews
Andy
5 years of experience
Infiniti J30 V6-3.0L - Tail Lamp Bulb Replacement (Driver Side, Passenger Side) - San Jose, California
He was on time and professional. He fixed my tail light fast and was careful of the fragile trims.

Braxton

12 years of experience
205 reviews
Braxton
12 years of experience
Infiniti J30 V6-3.0L - Car starts and then dies - Deltona, Florida
Great service. Prompt and professional

Chris

16 years of experience
312 reviews
Chris
16 years of experience
Infiniti J30 V6-3.0L - Battery - San Diego, California
Chris arrived on time and was extremely knowledgeable and courteous. He immediately saw that my self-diagnosis of the problem was wrong and saved me considerable money. I would certainly want him to work on my car again.

Robert

38 years of experience
237 reviews
Robert
38 years of experience
Infiniti J30 V6-3.0L - Car is not starting - Jonesboro, Georgia
Mr. Robert arrived about 30 minutes early. He was very professional and cordial. He asked me a series of questions about my vehicle and then got right down to busy on troubleshooting the various engine component(s). Afterwards, in easy to understand terms, he explained his finding(s) and even made suggestion(s) on how to approach resolving the needed repair(s).

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Infiniti J30 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Infiniti MECHANICS
1000+
experts on our platform

Recent articles & questions

P0390 OBD-II Trouble Code: Camshaft Position Sensor “B” Circuit (Bank 2)
Trouble code P0390 means the PCM does not detect the camshaft position sensor B signal and is very similar to trouble code P0345.
How to Buy Good Quality Seat Covers
Kids, Kids, pets, even you – nearly everything that enters your vehicle is tough on your car seats. We live in our cars these days, and everything from sodas from lunch to glitter and mud are going to stick into...
How a Battery Works With a Car's Electrical System
Have Have you ever wondered how your car’s electrical system works? It all starts with your car battery. Your car's electrical system operates on a closed circuit, with the main power system being the automotive battery. It uses less than...

Truck acts like it is not getting gas

We need to find out if you have sufficient fuel pressure. You should see the fuel spraying out when you're trying to start the car. If it is barely coming out, then you probably don't have enough fuel pressure; you...

Driver side rear shock is leaking oil the set only has about 2500 miles on them? they are coil over shocks.

Hello. A shock is not always bad, but if you see some residue oil leaking from the shock then it may not be functioning fully. If you see a really wet and dripping shock, then it should be replaced. The...

My car is C180 AMG. My car jerks but when i unplug the airflow meter sensor it drives normal, its a new airflow meter.

Hello there, many different faults can cause the MAF sensor on your 1999 C180 to cause the car to run poorly. If the MAF sensor was replaced and the problem still remains than the most likely faults are a vacuum...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com