GMC C2500 Car Fuse Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Car Fuse Replacement Service

How much does a Car Fuse Replacement cost?

On average, the cost for a GMC C2500 Car Fuse Replacement is $99 with $4 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 GMC C2500L6-4.8LService typeCar Fuse ReplacementEstimate$123.87Shop/Dealer Price$136.09 - $150.25
1985 GMC C2500V8-5.7LService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.11 - $130.28
1995 GMC C2500V8-5.7LService typeCar Fuse ReplacementEstimate$104.55Shop/Dealer Price$116.96 - $131.64
1986 GMC C2500V8-6.2L DieselService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.09 - $130.24
1992 GMC C2500V8-5.0LService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.12 - $130.31
1994 GMC C2500V8-6.5L DieselService typeCar Fuse ReplacementEstimate$103.87Shop/Dealer Price$116.11 - $130.28
1988 GMC C2500V8-6.2L DieselService typeCar Fuse ReplacementEstimate$108.87Shop/Dealer Price$120.97 - $135.04
1984 GMC C2500L6-4.1LService typeCar Fuse ReplacementEstimate$108.87Shop/Dealer Price$121.34 - $135.70
Show example GMC C2500 Car Fuse Replacement prices

What is the Fuse all about?

Fuses, found in the fuse box, are low-resistance resistor devices that protect the circuits in the car from excessive current. Fuses are made to blow if the circuit gets more current than it is supposed to, protecting the circuit from the high current flow. There can be multiple fuses in multiple locations. The fuses should always be replaced with the specified fuse. All fuses come with the “AMP” value written on top of it. The fuse box will specify the correct value of fuse required.

Fuses-MATROX-1

Keep in mind:

If a fuse blows, is replaced, and then blows again, it indicates a problem with the electrical system. Something is causing the overload. Be sure to have the car inspected.

How it's done:

  • Test fuses using a test lamp.
  • Remove and replace the faulty fuse.
  • Inspect fuse block for corrosion or melted holders.

Our recommendation:

Any time an electrical component of your vehicle stops working, you should schedule an inspection. There’s no way to perform regular maintenance on fuses, but they’re a straightforward and affordable repair when you notice that one is blown.

What common symptoms indicate you may need to replace the Fuse?

  • One or more electrical components are not working (lights, radio, etc.)

How important is this service?

Fuses are resistors that send power to the electrical components of your car. Fuses receive a large amount of current, and lessen that amount of current before it is sent to each electrical part, so that the electrical components aren’t damaged by excessive power. When a fuse blows, electrical power will be not flow through it, and certain parts of your car will stop working. A blown fuse is unlikely to cause any damage to your vehicle, but the electrical components that rely on that fuse won’t resume working until the fuse is replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

H

26 years of experience
828 reviews
H
26 years of experience
GMC C2500 V8-5.7L - Exhaust Manifold - Atherton, California
This guy is great. Even swapped a part in the rain! When I need more work done, I'm calling De Jesus! For sure

Jason

9 years of experience
175 reviews
Jason
9 years of experience
GMC C2500 V8-5.7L - Coolant is leaking - Atherton, California
Jason was very thorough in his inspection of my truck. He also was quite patient and listened to all my concerns. Quality recommendations and a great personality.

Brian

22 years of experience
7 reviews
Brian
22 years of experience
GMC C2500 V8-5.7L - Fuel Filter - Portland, Oregon
ALL AROUND GREAT SERVICE!

Isai

27 years of experience
230 reviews
Isai
27 years of experience
GMC C2500 V8-7.4L - Car is not starting - San Antonio, Texas
Isai was extreemly knowledgable and willing to share his insights. He was also extreemly professional and promt.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of GMC C2500 services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Disabled Driver Laws and Permits in Alaska
Each Each state has its own special requirements for disabled drivers. Below are some of the qualifications you must have in the state of Alaska to obtain a disabled driver license plate and/or permit. How do I know if I...
P2767 OBD-II Trouble Code: Input/Turbine Speed Sensor B Circuit No Signal
P2767 means there is a problem in the input or turbine speed sensor B due to faulty sensors or solenoids, an electrical issue or transmission fluids.
5 Benefits of Waxing Your Car
Waxing your car regularly not only keeps it shiny — it also protects the exterior from damages and saves you money.

Dashboard lights on all the time - 2013 Infiniti JX35

Hey there. There is no information on the issue you are having with the dash lights. You may have a short in a harness causing the light to stay on. I would have a mechanic scan the body computer to...

Check Engine Light is on - 2008 Dodge Avenger

Hello. From what you describe it would appear that your Check Engine Light is on for the intake manifold position sensor. Your vehicle is equipped with an intake manifold that uses butterfly valves inside the manifold ports in order to...

2000 Impala 3.8L: 1) temp gauge only moves when im warming the vehicle up. Otherwise it doesn't move at all. 2) heater blows cold air coz temp gauge isnt working & it doesnt blow on feet. Like I don't hear a "click" when trying to switch the blower direction. What needs to be replaced in order to fix bit H issues? Please & thank you

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com