Ford LTD Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(29)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(29)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ford LTD Fuel Injector Replacement is $606 with $501 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1968 Ford LTDV8-5.0LService typeFuel Injector ReplacementEstimate$2409.63Shop/Dealer Price$2953.92 - $4517.05
1973 Ford LTDV8-5.8LService typeFuel Injector ReplacementEstimate$2772.05Shop/Dealer Price$3422.50 - $5303.98
1981 Ford LTDV8-5.8LService typeFuel Injector ReplacementEstimate$2772.05Shop/Dealer Price$3422.50 - $5303.97
1984 Ford LTDV8-5.8LService typeFuel Injector ReplacementEstimate$2772.05Shop/Dealer Price$3422.43 - $5303.85
1977 Ford LTDV8-5.8LService typeFuel Injector ReplacementEstimate$2772.05Shop/Dealer Price$3422.55 - $5304.06
1986 Ford LTDV6-3.8LService typeFuel Injector ReplacementEstimate$1295.72Shop/Dealer Price$1596.31 - $2459.77
1984 Ford LTDV6-3.8LService typeFuel Injector ReplacementEstimate$2500.31Shop/Dealer Price$3108.76 - $4909.65
1982 Ford LTDV8-5.0LService typeFuel Injector ReplacementEstimate$2363.13Shop/Dealer Price$2908.21 - $4471.92
Show example Ford LTD Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0

Toby

10 years of experience
100 reviews
Toby
10 years of experience
Ford LTD V8-5.0L - Ball Joint Front Replacement (Upper Left, Lower Left) - Bedford, Texas
Job well done in a timely fashion.

Kiri

20 years of experience
372 reviews
Kiri
20 years of experience
Ford LTD V8-5.0L - Car is slow to accelerate - Philadelphia, Pennsylvania
Knowledgable mechanic blended with a great attitude. Took time to explain and teach.

Godwin

24 years of experience
253 reviews
Godwin
24 years of experience
Ford LTD * - Pre-purchase Car Inspection - Buena Park, California
I found my dream car on the internet but it was located in California. I needed someone in the local area to check out the car for me before I made the purchase. Fortunately I found out about yourmechanic.com and Godwin was the mechanic assigned to handle my situation. I could not be more happy with the service he provided. Nothing like having peace of mind when making a large purchase sight unseen. Thanks Godwin for the professional service.

Raymond

37 years of experience
402 reviews
Raymond
37 years of experience
Ford Escape V6-3.0L - Fuel Injector - Las Vegas, Nevada
Raymond went above and beyond to diagnose and solve the problem.

Excellent Rating

(29)

Rating Summary
27
2
0
0
0
27
2
0
0
0
Number of Ford Fuel Injector Replacement services completed
319+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Suspension Springs
Common signs include the vehicle tilting to one side, uneven tire wear, bouncing while driving, and bottoming out.
The Guide to Right-of-Way Laws in California
Common Common sense, courtesy, and right-of-way laws work in combination to ensure your safety in traffic. This is why, when yielding the right of way means avoiding a collision that could cause harm to others, or damage to vehicles, you...
P2006 OBD-II Trouble Code: Intake Manifold Runner Control Stuck Closed Bank 1
P2006 trouble code definition The P2006 code is a generic OBD2 diagnostic trouble code relating to the intake manifold runner control circuit....

Coolant leak but not sure from where.

Hello, the only way to find a coolant leak is to use a coolant system pressure tester and then inspect for leaks. A coolant system pressure tester has an attachment that replaces the radiator cap and is attached to a...

What qualifications do you need if you are to rebuild an engine?

Hi there. If you were to rebuild an engine on your own in your garage (that is, your engine and not someone else's engine), you would just need your tools and some books (with procedures and specifications) that can help...

Temperature gauge problem on a 2005 Mercedes Benz S500

Hello - I would first check for problem codes, whether the Check Engine light is illuminated or not. And, if the engine is not really overheating, the problem is most likely the engine temperature sensor (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-temperature-gauge) (the sensor for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com