Ford G-100 Clutch is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(10)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(10)

Clutch is not working Inspection Service

How much does a Clutch is not working Inspection cost?

On average, the cost for a Ford G-100 Clutch is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1971 Ford G-100L6-4.1LService typeClutch is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1972 Ford G-100L6-4.1LService typeClutch is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Ford G-100 Clutch is not working Inspection prices

While most vehicles out on the road today are automatics, there are still quite a few manual transmissions cruising the streets. When it comes to a manual transmission, one of the most important components is the clutch. Clutches that are well maintained and cared for can last up to 80,000 miles but an abused clutch can start to fail after a mere 35,000 miles.

The clutch is essential to the safe operation of the vehicle and a malfunctioning clutch can quickly damage other transmission parts, which will greatly increase the cost of the repair. Clutch problems should be addressed as soon as the first signs of trouble appear.

How this system works:

The clutch system transmits engine power to the gearbox and also allows the transmission to be interrupted during gear change. The main components of the clutch system include the master cylinder, a slave cylinder, flywheel, and an operating linkage.

The majority of vehicles use a friction clutch that is operated by hydraulic fluid or a cable. A flywheel connects to the engine and the clutch plate connects to the transmission. The clutch is engaged when the pedal is not being depressed. The springs push the pressure plate against the flywheel, which locks the transmission to the engine.

When the clutch pedal is depressed, the clutch disengages. An arm pushes a release bearing against the center of the spring, which releases the clamping pressure.

Common reasons for this to happen:

  • Malfunctioning Clutch Master/Slave Cylinder: A clutch master cylinder has a reservoir that holds brake fluid. The master cylinder is connected to the slave cylinder via hoses. As the clutch pedal is depressed, brake fluid moves from the master cylinder to the slave, which applies pressure to engage the clutch. Both the master and slave cylinders have seals that can wear out which will cause a leak. A leak will eventually lead to a clutch malfunction. Common symptoms of a failing master or slave clutch cylinder include the clutch going all the way to the floor, not being able to shift gears and a brake fluid leak.

  • Clutch Fluid Leak: Clutch fluid is actually just brake fluid. A leak in the system will make it hard to change gears and the clutch pedal may go all the way to the floor. The may also be a puddle of brake floor on the garage floor. A fluid leak is often a symptom of a more serious problem.

  • Slipping Clutch: Clutches are designed to slip a bit when the clutch is first engaged or during gear change to provide a smooth ride but once the clutch is fully engaged there shouldn’t be any slippage. In most cases, slipping will happen while the vehicle is hauling a load or when going up a hill. Slipping can cause the clutch to get hot, which can result in burned clutch facings, which can damage the flywheel and pressure plate. Normal wear and tear is usually the cause of a slipping clutch. The problem should be addressed as soon as the first symptoms appear to avoid additional damage.

  • Chattering or Jerky Clutch: A grabby or jerky clutch is often caused by oil or grease that has gotten on the clutch linings. A warped flywheel or a loose clutch cover can also cause this problem.

  • Air in Hydraulic Line: If there is air in the hydraulic line it will take up space that the fluid needs to build the proper pressure. This can result in a sticking clutch.

  • Misadjusted linkage: The linkage that connects the pedal to the clutch system can become misadjusted. A sticking clutch is often a sign of this problem. The linkage will need to be adjusted to correct this problem.

  • Broken Clutch Cable: The clutch cable can end up stretched or broken. If this is the case the clutch will often stick. The cable will need to be replaced.

  • Clutch Will Not Release: There are many things that can cause a clutch to not release. Everything from the damaged input shaft splines to a worn bearing retainer to a bent clutch disk. A vehicle that has a clutch that will not release should be inspected as soon as possible as not repairing it will lead to further damage.

  • Hard Clutch: If the clutch feels hard or stiff there is a good chance there is a problem with the pedal linkage or the clutch cable.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the clutch issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

The clutch is integral to a smooth working transmission and even one malfunctioning part can have drastic affects on the rest of the clutch system as well as the transmission. Clutch issues should be repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Francisco

11 years of experience
61 reviews
Francisco
11 years of experience
Ford Ranger V6-3.0L - Clutch is not working - Manor, Texas
Knew was he was doing, handled business .

Tung

16 years of experience
310 reviews
Tung
16 years of experience
Ford Ranger L4-2.3L - Clutch is not working - Atlanta, Georgia
Great.

Carlos

28 years of experience
511 reviews
Carlos
28 years of experience
Ford Mustang V8-5.0L - Clutch is not working - Moreno Valley, California
Carlos is very friendly and did all inspection in less than 30 min and discovered the problem with my clutch system.. he was willing to answer my question about labor and part costs. Will be using this service from now on for any future inspections. two thumbs up!

Torrieanto

12 years of experience
632 reviews
Torrieanto
12 years of experience
Ford Probe L4-2.2L Turbo - Clutch is not working - Tampa, Florida
Great guy, great mechanic.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Ford Clutch is not working Inspection services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

How Are Car Wires Protected From Damage?
The highest tech cars can contain miles of electrical wiring. Wires must be secured and protected from heat and debris in order to work properly.
A Buyer’s Guide to the 2012 Chevrolet Volt
Whether Whether you’re concerned about the environment or just want a vehicle that allows you to use less gas, the 2012 Chevrolet Volt might be just right for you. Designed to run entirely via an electric current, this electric hybrid...
P0158 OBD-II Trouble Code: 02 Sensor Circuit High Voltage (Bank 2, Sensor 2)
P0158 P0158 trouble code definition Oxygen Sensor Circuit High Voltage (Bank 2 Sensor 2) What the P0158 code means The P0158 trouble code appears when the sensor has remained at a high voltage for too long. This oxygen sensor is...

Car not going into gear

Hello. The two things that I would first recommend evaluating in relation to your concern are the brakes and the transmission pressure control solenoid. The brakes may be locked in a position that will not allow the car to move....

EPC light on 2004 Jetta. Code said brake switch faulty, but brakes lights worked. Replaced brake switch, now no brake lights.

Hi there. The first thing that pops in my mind beyond of what you have listed is perhaps the electrical harness attached to the brake switch. Perhaps the harness itself is damaged or you have an exposed wire, loose ground...

my 2004 mitsubishi montero sport cranks but wont start and is leaking coolant

Have the cooling system pressure tested to see where the coolant is leaking out? If timing belt was broken or installed wrong you may have bent the valves in the engine and should do a compression test to see if...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com