Ford E-150 Econoline Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(118)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(118)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ford E-150 Econoline Power Steering Pressure Hose Replacement is $205 with $65 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Ford E-150 EconolineV6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$422.92Shop/Dealer Price$482.96 - $652.53
2002 Ford E-150 EconolineV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.15 - $467.52
1992 Ford E-150 EconolineV8-5.0LService typePower Steering Pressure Hose ReplacementEstimate$254.45Shop/Dealer Price$283.42 - $366.16
2002 Ford E-150 EconolineV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.18 - $467.57
2000 Ford E-150 EconolineV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$365.09 - $470.93
1998 Ford E-150 EconolineV8-4.6LService typePower Steering Pressure Hose ReplacementEstimate$322.89Shop/Dealer Price$358.76 - $460.53
1995 Ford E-150 EconolineV8-5.8LService typePower Steering Pressure Hose ReplacementEstimate$275.69Shop/Dealer Price$309.99 - $408.67
2001 Ford E-150 EconolineV8-5.4LService typePower Steering Pressure Hose ReplacementEstimate$326.57Shop/Dealer Price$363.18 - $467.57
Show example Ford E-150 Econoline Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(118)

Rating Summary
105
4
2
2
5
105
4
2
2
5

Jeremy

21 years of experience
802 reviews
Jeremy
21 years of experience
Ford E-150 Econoline V6-4.2L - Alternator - Lake Worth, Florida
On time, actually a little early which is better. Professional. Efficient. Work was performed accurately and in a timely manner. Highly recommend Jeremy.

Alex

24 years of experience
464 reviews
Alex
24 years of experience
Ford E-150 Econoline V8-5.8L - Thermostat - Carrollton, Texas
Alex was great and focused. He quickly replaced my thermostat and showed me the one he swapped and then proceeded to explain to me how it kept regiltated my engine temperature. After the inspection, he recommended I get my brake pads and front tires replaced - something I was already aware of which further solidified my trust in his skilla and competency. I would definitely recommend "My Mechanic" to get any and all your mechanically needs fixed.

Patrick

34 years of experience
1579 reviews
Patrick
34 years of experience
Ford E-150 Econoline V8-4.6L - Initial Safety Inspection - Driftwood, Texas
Excellent, was even early. Fine diagnosis and friendly.

Andrew

12 years of experience
396 reviews
Andrew
12 years of experience
Ford E-150 Econoline V6-4.2L - Car is not starting - Columbia, Maryland
Andrew knew his stuff, arrived on time, and provided a quick and easy synopsis. He also gave several suggestions for the vehicles futures and provided a great quote.

Excellent Rating

(118)

Rating Summary
105
4
2
2
5
105
4
2
2
5
Number of Ford E-150 Econoline services completed
1298+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Live in Your Car for a Short Time
So So you’ve just moved to a new city and your apartment won’t be ready for a month. Or maybe it’s summer break and you just haven’t been able to find a place. Or you want to see what it’s...
The Best Used Cars to Buy If You Get Motion Sickness
For For people that suffer from motion sickness, even on the shortest car trip, riding in a vehicle can prove to be unbearable. What’s great is that there are a number of cars on the market that can help to...
How to Register a Car in Kentucky
Getting Getting a car registered is an essential part of obeying the laws of a state. If you are new to state of Kansas or are a current resident that has just bought a new car, then you will need...

How do you remove and reinstall head restraints?

Your car’s head restraints serve and important purpose in providing better comfort, but also in ensuring safety during an impact. Of course, there may come a time that you need to remove them (and reinstall them when you’re done). Here’s...

my moped airbox keeps coming loose

Hi there: Although our mechanics don't service these type of motorbikes, it's possible that you have a bracket that holds the air box that is loose. You might want to contact the manufacturer of your moped and ask them for...

I am having [coolant](/topics-coolant-gmc/) loss problems and cannot seem to find the source. I am out of ideas.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com