Ford Custom 500 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Ford Custom 500 Hazard / Turn Signal Flasher Replacement is $144 with $49 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1969 Ford Custom 500V8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$213.91Shop/Dealer Price$248.64 - $330.33
1966 Ford Custom 500L6-3.9LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1974 Ford Custom 500V8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1973 Ford Custom 500V8-7.5LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.64 - $310.32
1969 Ford Custom 500V8-6.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.67 - $310.39
1973 Ford Custom 500V8-6.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$193.91Shop/Dealer Price$228.66 - $310.36
1972 Ford Custom 500V8-7.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$198.91Shop/Dealer Price$233.52 - $315.12
1971 Ford Custom 500V8-6.4LService typeHazard / Turn Signal Flasher ReplacementEstimate$198.91Shop/Dealer Price$233.89 - $315.78
Show example Ford Custom 500 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jack

15 years of experience
10 reviews
Jack
15 years of experience
Ford Mustang V8-4.6L - Hazard / Turn Signal Flasher - Austin, Texas
Jack was awesome. On time, helpful, and straightforward.

Victor

35 years of experience
229 reviews
Victor
35 years of experience
Ford F-150 V8-4.6L - Hazard / Turn Signal Flasher - Albuquerque, New Mexico
Very experienced, did the job in about 15 minutes, didn't mind paying him at all even though he did it so fast it would of taken me hours.

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Ford Thunderbird V8-4.6L - Hazard / Turn Signal Flasher - Fountain Valley, California
..

Steven

21 years of experience
200 reviews
Steven
21 years of experience
Ford Ranger L4-2.3L - Hazard / Turn Signal Flasher - Euless, Texas
Steven Trujillo was smart, pleasant, helpful, and INTENT-upon getting the repair right, doing three different approaches, in order to optimize the results. He's a cheerful, diligent, intelligent, well-meaning guy, and I'm glad to have met him. He's the kind of fellow that I'd count a friend, in short-order. :)

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ford Hazard / Turn Signal Flasher Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Wheel Nut Missing?
A A wheel nut can go missing due to wheels being mounted at different temperatures, not tightened down enough, or tightened too much. Over time, the loosened wheel nut may fall off of the wheel, but you may not notice...
How to Get Fiat Dealership Certified
Fiat car dealerships offer automotive technician jobs to mechanics who are certified through the MOPAR CAP (Career Automotive Program).
P0408 OBD-II Trouble Code: Exhaust Gas Recirculation Sensor B Circuit High
Trouble code P0408 means the PCM has detected an issue with the exhaust gas recirculation (EGR) system, often due to a faulty EGR temperature sensor.

Brake lights not working

The brake light switch should be checked for proper operation since it's the most common failure for this issue. The the brake light system needs to be checked for a switch failure and to see if water is getting into...

Battery keeps dying out after the car sits for two days

Hey there. You may have excess current being drawn (https://www.yourmechanic.com/article/how-to-diagnose-a-car-battery-drain_2) somewhere in a circuit while the car is not running. A mechanic would use an ammeter to probe various circuits to isolate the problem. As a temporary measure you could...

02 gmc lb7 duramax won’t start

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com