Dodge Royal Monaco Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(75)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(75)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Dodge Royal Monaco Control Arm Assembly Replacement is $184 with $89 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1977 Dodge Royal MonacoV8-7.2LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$391.75Shop/Dealer Price$470.94 - $686.01
1977 Dodge Royal MonacoV8-6.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$398.99Shop/Dealer Price$485.01 - $720.52
1975 Dodge Royal MonacoV8-5.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$273.47Shop/Dealer Price$328.11 - $469.48
1977 Dodge Royal MonacoV8-5.2LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$558.67Shop/Dealer Price$684.59 - $1039.84
1975 Dodge Royal MonacoV8-6.6LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$495.57Shop/Dealer Price$598.89 - $874.98
1977 Dodge Royal MonacoV8-7.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$273.47Shop/Dealer Price$328.11 - $469.48
1977 Dodge Royal MonacoV8-5.2LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$278.47Shop/Dealer Price$332.97 - $474.24
1977 Dodge Royal MonacoV8-5.2LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$503.07Shop/Dealer Price$606.72 - $883.06
Show example Dodge Royal Monaco Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1

Kyle

12 years of experience
39 reviews
Kyle
12 years of experience
Dodge Stratus L4-2.4L - Control Arm Assembly Replacement (Front Lower Right) - Concord, North Carolina
professional/competent

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
Dodge Durango V8-5.7L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right, Front Lower Left, Front Lower Right) - Laguna Hills, California
Ricardo showed up on time and was ready to work. He noticed and recommended some extra service (sway bar bushings) while he was R&R the main job (control arms), called me for approval, and got the parts. Despite some challenges and difficulty with the job which caused the time to go over by several hours, he stayed to finish the job and close up. He also noticed some possible engine issue (water in oil) and we decided together to wait on some additional but delayable work. Ricardo's attitude and helpfulness were excellent. I appreciate the new front suspension being done at a great price.

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Dodge Charger V6-3.5L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Atlanta, Georgia
Thanks Michael. Will definitely work with Michael again.

Logan

49 years of experience
82 reviews
Logan
49 years of experience
Dodge Neon L4-2.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Modesto, California
Logan was is a great dude! He went above and beyond to get the parts and get my ride back on the road. many many thanks logan!!!!!

Excellent Rating

(75)

Rating Summary
67
7
0
0
1
67
7
0
0
1
Number of Dodge Control Arm Assembly Replacement services completed
825+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

Understanding Electric Vehicles
For For people who grew up in a world where electric vehicles (EVs) existed only in cartoons and science fiction movies, seeing one pull up alongside you at a red light is still an unusual sight. Still, every day there...
Symptoms of a Bad or Failing Door Lock Relay
If the power door locks function intermittently or do not work at all, you may need to replace the door lock relay.
How to Figure Out the Full Cost of a Car Loan
Taking Taking out a car loan is one of the most common ways to finance purchasing a car. This is especially true if you are buying a new car, which usually costs too much to pay for in cash. Buyers...

When I get to about 60 mph and higher I hear a loud rattle like noise, what could it be?

Hi there. Check under the vehicle for any heat shields that could be moving during high wind turbulence. Also, look for any loose wiring or parts that can move when turbulence is making it move around at great speeds. If...

Slave cylinder for clutch

The clutch slave cylinder is external outside the transmission. It can be replaced without removing the transmission.

Rough idle new spark plugs coil packs bank 1 and 2 number 2 02 sensors fuel filter air filter maf sensor

Hello. I suggest that you test the idle air control valve operation and check the throttle body for excessive buildup. Both of which can cause erratic idling. At your particular mileage it will be a great idea to have your...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com