Dodge D100 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(46)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(46)

Intake Manifold Gaskets Replacement Estimate for Dodge D100

Dodge D100 Intake Manifold Gaskets Replacement costs $429 on average.

CarServiceEstimateShop/Dealer Price
1987 Dodge D100V8-5.2LService typeIntake Manifold Gaskets ReplacementEstimate$587.67Shop/Dealer Price$706.55 - $959.23
1976 Dodge D100L6-3.7LService typeIntake Manifold Gaskets ReplacementEstimate$467.95Shop/Dealer Price$558.41 - $731.99
1985 Dodge D100L6-3.7LService typeIntake Manifold Gaskets ReplacementEstimate$395.95Shop/Dealer Price$475.23 - $640.43
1978 Dodge D100V8-5.9LService typeIntake Manifold Gaskets ReplacementEstimate$490.35Shop/Dealer Price$586.32 - $776.65
1989 Dodge D100V8-5.2LService typeIntake Manifold Gaskets ReplacementEstimate$650.66Shop/Dealer Price$779.28 - $1039.27
1976 Dodge D100V8-5.9LService typeIntake Manifold Gaskets ReplacementEstimate$490.35Shop/Dealer Price$586.40 - $776.78
1975 Dodge D100V8-5.2LService typeIntake Manifold Gaskets ReplacementEstimate$588.17Shop/Dealer Price$703.83 - $954.09
1988 Dodge D100V8-5.9LService typeIntake Manifold Gaskets ReplacementEstimate$592.84Shop/Dealer Price$702.37 - $902.87
Show example Dodge D100 Intake Manifold Gaskets Replacement prices

Intake Manifold Gaskets Replacement Service

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(46)

Rating Summary
44
1
1
0
0
44
1
1
0
0

Peter

25 years of experience
480 reviews
Peter
25 years of experience
Dodge D100 V8-5.9L - Serpentine/Drive Belt Replacement - Pasadena, California
Awesome service, knowledgeable and friendly. Peter's honesty is rare these days. Went above and beyond. Will definitely work with him again. Highly recommended.

Richard

20 years of experience
27 reviews
Richard
20 years of experience
Dodge D100 V8-5.2L - Radiator Flush - Yorba Linda, California
Very professional. He took his time and answered all my questions. Thank you Richard.

William

12 years of experience
29 reviews
William
12 years of experience
Dodge Avenger L4-2.4L - Intake Manifold Gaskets - Acworth, Georgia
William made sure that my 2008 Dodge Avenger intake manifold was probably installed and went out of his way to help pickup a suggested PCV Valve replacement for my car. It was nice to see that he wanted to make sure that everything was properly installed.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Dodge Challenger V8-5.7L - Intake Manifold Gaskets Replacement - Houston, Texas
Professional

Excellent Rating

(46)

Rating Summary
44
1
1
0
0
44
1
1
0
0
Number of Dodge Intake Manifold Gaskets Replacement services completed
506+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1300+
experts on our platform

Recent articles & questions

B1985 OBD-II Trouble Code: Seat Switch Lumbar Deflate Circuit Failure
B1985 means there the switch lumbar deflate circuit is bad. This is most likely due to a faulty circuitry in the part.
B1922 OBD-II Trouble Code: Air Bag Safing Sensor Output Circuit Short To Battery
B1922 means a circuit in the air bag deployment system is causing it to not work properly. This is likely due to an electrical issue in the wiring.
How to Replace a Front Axle Engagement Switch on Most Cars
The switch that engages the front axle fails when it gets stuck, does not activate the four-wheel drive, or is difficult to engage.

Battery light is on and replaced alternator yesterday

Finding hidden kill switches

If the vehicle will not start, an unknown aftermarket "kill switch" that is active, would be found in the course of a no start diagnostic. On the other hand, if a remotely operated device exists, but it is not presently...

My car just started making a loud noise last night when I push the gas and I can feel it under my feet. Is it a muffler problem?

You should have the exhaust system checked since you just had work done recently something in the repairs done may have come loose. Look under vehicle first to see if anything is hanging down so you cannot drive it. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com