Dodge Colt Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Dodge Colt Power Steering Pressure Hose Replacement is $166 with $26 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Dodge ColtL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$604.22Shop/Dealer Price$720.13 - $1059.74
1990 Dodge ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$235.27 - $289.12
1992 Dodge ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$235.30 - $289.16
1994 Dodge ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$586.37Shop/Dealer Price$698.32 - $1030.00
1991 Dodge ColtL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$236.77 - $291.74
1990 Dodge ColtL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$235.44 - $289.41
1990 Dodge ColtL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$235.31 - $289.19
1992 Dodge ColtL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$215.95Shop/Dealer Price$235.30 - $289.16
Show example Dodge Colt Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0

Robert

32 years of experience
646 reviews
Robert
32 years of experience
Dodge Colt L4-1.5L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Hayward, California
He went above and beyond my expectations. He performed the job very well, fixing what I was unable to fix myself. I would defiantly recommend him to my friends and family and will defiantly have him work on my car again in the future.

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Dodge Colt L4-1.5L - Oil Change - Indianapolis, Indiana
Great job!!! Car is running much better after the tune up. We thought we might have needed a new air filter, but after it was checked, he said it was still in good shape. Saved us about $30.00. Thank you!!

John

11 years of experience
94 reviews
John
11 years of experience
Dodge Ram 1500 V8-5.9L - Power Steering Pressure Hose - San Diego, California
John is excellent. He was on time and worked until 100% of the work was completed. Very knowledgeable and thorough. I would recommend him to anyone.

Andrew

18 years of experience
70 reviews
Andrew
18 years of experience
Dodge Ram 1500 V6-3.9L - Power Steering Pressure Hose - San Antonio, Texas
Very satisfied.

Excellent Rating

(43)

Rating Summary
42
1
0
0
0
42
1
0
0
0
Number of Dodge Power Steering Pressure Hose Replacement services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

P0449 OBD-II Trouble Code: Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction
P0449 code definition P0449 is a general OBD2 diagnostic trouble code indicating an issue with the EVAP vent control circuit. This code...
5 Tips to Being a Successful Carpooler
Ensure you always have a ride by being a timely, reliable, and respectful carpooler.
P0442 OBD-II Trouble Code: Evaporative Emission Control System Leak Detected (Small Leak)
P0442 code definition P0442 is a diagnostic trouble code (DTC) that is seen when a evaporative emission control system malfunction is present....

A little oil in radiator?

Since you have a manual transmission, there are no transmission oils going into a cooler in the radiator. The only way coolant and oil can mix is from the engine oil getting into the coolant passing in the engine. This...

Car losing gas mileage and not much power

Hello there, thank you for asking about your 1989 Buick Reatta. Vehicles lose both mileage and power over time - especially after 27 years! The only way to combat this is by keeping up on your maintenance and repairs. A...

Car accelerates and then completely stop accelerating at 25 or 40 mph.

Hi Joel. What you are describing is typically an indication that your Jetta has entered what's called a "limp mode". This happens when the ECU detects a problem with the transmission. It activates a fail safe mode to restrict the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com