Dodge B200 Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Dodge B200 Car Battery Replacement is $255 with $160 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1977 Dodge B200V8-5.9LService typeCar Battery ReplacementEstimate$434.99Shop/Dealer Price$524.99 - $772.49
1978 Dodge B200V8-5.2LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1980 Dodge B200V8-5.2LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1976 Dodge B200V8-5.9LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$504.99 - $752.48
1976 Dodge B200L6-3.7LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.02 - $752.55
1976 Dodge B200V8-5.2LService typeCar Battery ReplacementEstimate$414.99Shop/Dealer Price$505.01 - $752.52
1978 Dodge B200L6-3.7LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$509.87 - $757.28
1978 Dodge B200V8-6.6LService typeCar Battery ReplacementEstimate$419.99Shop/Dealer Price$510.24 - $757.94
Show example Dodge B200 Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Dodge mechanics

Real customer reviews from Dodge owners like you.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0

Napoleon

27 years of experience
147 reviews
Napoleon
27 years of experience
Dodge B200 * - Car is not starting - Redondo Beach, California
Thank you very much. Napoleon showed up on time and did a wonderful job. I hope he is my mechanic next time I call. Thanks again !! :-)

Jason

32 years of experience
507 reviews
Jason
32 years of experience
Dodge B200 V8-5.2L - Brakes, Steering and Suspension Inspection - San Jose, California
Very patient, kind and considerate. Answered all my questions in a simple way that I could understand. I will always request Jason. Even if he is booked for 2 weeks. I will wait for him to become available. He is worth waiting for. Professional, Competent, Expert, Knowledgable, Goes above and beyond, Friendly, Courteous and Timely.

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Dodge B200 V8-5.2L - Fuel is leaking from gas tank - Grand Terrace, California
Jay was Awesome was happy you sent him !!!hope he finishes the job when get my part !

Brian

24 years of experience
200 reviews
Brian
24 years of experience
Dodge B200 V8-5.9L - Car is not starting - Hanover, Pennsylvania
Brian worked very methodically to narrow down the problem I had. It was a starting issue. It seems as though the distributor is the culprit, but I won't know if that is the answer until I replace it with a new one. Brian gave me his phone number to inform him of the results of his diagnosis...He is a pleasure to work with.

Excellent Rating

(4)

Rating Summary
3
1
0
0
0
3
1
0
0
0
Number of Dodge B200 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Dodge MECHANICS
1400+
experts on our platform

Recent articles & questions

What Steps Must I Take Before Buying a Used Car?
Buying Buying a used car can feel like a very scary situation when it's your first time doing so. There are so many options and sometimes people can be impulsive and end up getting a vehicle that doesn't suit them....
The Guide to Legal Car Modifications in Mississippi
ARENA Creative / Shutterstock.com Mississippi has a variety of laws regarding vehicle modifications. If you live in the state or are planning to move there, you need to make sure your modified car or truck is within...
How to Replace a Driveshaft Center Support Bearing
The center support bearing for the driveshaft is simple in design and function. It can be difficult to replace due to the driveshaft's complex build.

Can a defective catalytic converter cause clutch failure?

To answer your question, a catalytic converter cannot cause clutch failure. You have a series of independent failures, which is not very common for vehicles with less than 100,000 miles. I would take your 2013 Chevrolet Cruze back to the...

Can I use the product "Permatex 24125 Ceramic Extreme Brake Parts Lubricant" on semi-metallic brake pads? 2015 Mitsubishi Lancer

Hello. Yes, you can use this on the back side of the brake pads and on any other contact point in the brake pad bracket. This will assist in reducing noise.

Hi! What can cause the engine to shut off occasionally when shifting from reverse to drive in an automatic transmission? This has

Hello, thank you for writing in. There are several things you can check, luckily if you are mechanically inclined at all you can check quite a few at home. To begin, make sure your idle air control valve and throttle...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com