Chevrolet Silverado 3500 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet Silverado 3500 Front Crankshaft Seal Replacement is $343 with $49 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet Silverado 3500V8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$424.12Shop/Dealer Price$456.34 - $535.97
2003 Chevrolet Silverado 3500V8-6.6L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$642.57Shop/Dealer Price$681.88 - $785.40
2002 Chevrolet Silverado 3500V8-6.6L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$642.57Shop/Dealer Price$681.97 - $785.55
2006 Chevrolet Silverado 3500V8-6.6L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$642.57Shop/Dealer Price$681.97 - $785.54
2001 Chevrolet Silverado 3500V8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$405.20Shop/Dealer Price$436.85 - $516.06
2006 Chevrolet Silverado 3500V8-6.0LService typeFront Crankshaft Seal ReplacementEstimate$405.20Shop/Dealer Price$434.05 - $511.16
2003 Chevrolet Silverado 3500V8-8.1LService typeFront Crankshaft Seal ReplacementEstimate$462.46Shop/Dealer Price$498.44 - $596.68
2005 Chevrolet Silverado 3500V8-6.6L Turbo DieselService typeFront Crankshaft Seal ReplacementEstimate$642.57Shop/Dealer Price$681.97 - $785.54
Show example Chevrolet Silverado 3500 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Chevrolet Silverado 3500 V8-6.6L Turbo Diesel - Oil Change - Nuevo, California
Jay is very good and has been doing this for a long time. But what makes him so different is he has integrity. Twice now, he has passed on doing a job because it did not need to be done. Most mechanics and for sure dealerships would have turned a blind eye and did the job. Example-With my last job, my brakes start making what I thought was a worn-out pad. My truck had 127K on it, and the brakes pads have never been done. Who knew you could get 200K out of a set of brake pads. Anyway, I had already purchased the pads and had them waiting for Jay. After inspecting all four brakes, he called me. He explained he could do the job, but the pads are only about 60% worn, and I should be able to make 200K. Of course, I passed on the brake job and just paid Jay for the inspection time. I wish other mechanics were this honest. Honesty will keep the customer coming back, and that is why Jay is my goto mechanic.

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Chevrolet Silverado 3500 V8-8.1L - Battery - Menifee, California
Arrived on time - extremely knowledgeable - highly motivated - highly recommend!!!!

Joseph

19 years of experience
40 reviews
Joseph
19 years of experience
Chevrolet Silverado 3500 V8-6.6L Turbo Diesel - Coolant is leaking - Olympia, Washington
Joe, introduced himself and was very informative and professional. Found the coolant leak and went over how I can refill coolant.

TJ

27 years of experience
362 reviews
TJ
27 years of experience
Chevrolet Silverado 3500 V8-8.1L - Oil Change - North Port, Florida
On time, personable and efficient. Had the job and inspection completed within an hour.

Excellent Rating

(10)

Rating Summary
10
0
0
0
0
10
0
0
0
0
Number of Chevrolet Silverado 3500 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

P0047 OBD-II Trouble Code: Turbo/Super Charger Boost Control Solenoid Circuit Low
P0047 code definition Turbo/Super Charger Boost Control Solenoid Circuit Low What the P0047 code means This code has varied definitions as provided...
Insurance Requirements for Car Registration in Kentucky
The The Kentucky Transportation Cabinet requires that all drivers in Kentucky carry liability automotive insurance, or “financial responsibility” in order to operate a vehicle legally and maintain vehicle registration. The minimum financial responsibility requirements for drivers under Kentucky law are...
Cell Phones and Texting: Distracted Driving Laws in Massachusetts
Massachusetts Massachusetts has a statewide ban on texting for drivers of all ages. Drivers under the age of 18 who hold a learner’s permit or provisional license are considered Junior Operators and are not allowed to use a cell phone...

Ticking noise when at idle and louder while accelerating

The noise may be the lifters, but the problem may not be the lifters. Your engine's heads have very small passages that feed oil to them through the heads, and, if the parts are being starved of oil, then the...

Heat shuts off when idling n driving

The engine controls the heater control valve opening and closing as the engine is up to operating temperature. If the engine temperature is too low then the heater output will go cold or low heat output until the engine is...

Check engine light came on and started blinking then the car lost power and was bogging

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com