Chevrolet R1500 Suburban Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(86)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(86)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet R1500 Suburban Power Steering Pressure Hose Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet R1500 SuburbanV8-6.2L DieselService typePower Steering Pressure Hose ReplacementEstimate$461.42Shop/Dealer Price$541.63 - $774.14
1991 Chevrolet R1500 SuburbanV8-6.2L DieselService typePower Steering Pressure Hose ReplacementEstimate$452.41Shop/Dealer Price$530.85 - $762.04
1990 Chevrolet R1500 SuburbanV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$296.35Shop/Dealer Price$335.80 - $449.96
1991 Chevrolet R1500 SuburbanV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$296.35Shop/Dealer Price$335.80 - $449.96
Show example Chevrolet R1500 Suburban Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(86)

Rating Summary
78
3
1
2
2
78
3
1
2
2

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Tire Rotation - Oceanside, California
He was very effcient and did a good job.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Battery - Oceanside, California
He was very complete and efficient.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet R1500 Suburban V8-5.7L - Car is not starting - Oceanside, California
He was very complete on checking all. under the hood . He gave a good diagnoses .

Bernie

53 years of experience
59 reviews
Bernie
53 years of experience
Chevrolet Monte Carlo V6-3.8L Turbo - Power Steering Pressure Hose - Philadelphia, Pennsylvania
Very good mechanic. Show's up on time, takes his time to get the job done, and is polite. He's reliable and I would recommend him to others.

Excellent Rating

(86)

Rating Summary
78
3
1
2
2
78
3
1
2
2
Number of Chevrolet Power Steering Pressure Hose Replacement services completed
946+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Understanding the Saab Oil Life System and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Saab Oil Life System (OLS) indicates when and what service your car needs.
How to Select an Auto Broker
Using Using an auto broker can save you time and effort when looking for a new or used vehicle. Alternately known as car brokers, motor brokers, or a car-buying service, auto brokers search for a vehicle for you and work...
How Long Does an ABS Speed Sensor Last?
ABS ABS braking systems are common on most new cars. ABS works to control your car’s braking ability under difficult driving conditions that can make it challenging to gain traction. The system consists of valves, a controller, and a speed...

What does the Engine Overheated -- Idle Engine message mean in a 2012 Chevrolet Equinox?

The Engine Overheated – Stop Engine message can appear on your driver information center (DIC), and is accompanied by a continuous chime. When the DIC displays this alert, the engine is too hot and can cause severe damage. Stop your...

My truck surges at low and idol speeds. Cold or hot. Sometimes quits when put in gear. Very low speed has a miss.

Hello and thank you for contacting YouMechanic. When you unplug the temperature sending unit the problem goes away but the engine light comes on. Check the plug to the sending unit for any corrosion or debris. Look at the pins...

My car starts then shuts right off

The first thing to check for in a case like this is air leaks. Any air that gets into the engine without going through proper channels will lean out the system and cause problems like this. Look under the hood...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com