Chevrolet Aveo5 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(68)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(68)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Chevrolet Aveo5 Front Crankshaft Seal Replacement is $317 with $23 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$370.98Shop/Dealer Price$389.91 - $429.69
2011 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1361.70Shop/Dealer Price$1622.39 - $2395.00
2010 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1361.70Shop/Dealer Price$1622.45 - $2395.10
2009 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1361.70Shop/Dealer Price$1622.45 - $2395.09
2008 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1014.14Shop/Dealer Price$1191.39 - $1705.91
2007 Chevrolet Aveo5L4-1.6LService typeFront Crankshaft Seal ReplacementEstimate$1014.14Shop/Dealer Price$1188.32 - $1700.54
Show example Chevrolet Aveo5 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(68)

Rating Summary
64
1
0
1
2
64
1
0
1
2

Eduardo

20 years of experience
570 reviews
Eduardo
20 years of experience
Chevrolet Aveo5 L4-1.6L - Check Engine Light is on - Houston, Texas
Very professional

Zave

18 years of experience
41 reviews
Zave
18 years of experience
Chevrolet Aveo5 L4-1.6L - Water Pump - Charlotte, North Carolina
Zave was on time for the appointment and pinpointed the exact problem with ease. Having mechanics in my family, he is very knowledgeable and the experience shows. 8 would definitely work with Zave again and I appreciate him getting to the root of the problem.

Noe

37 years of experience
604 reviews
Noe
37 years of experience
Chevrolet Aveo5 L4-1.6L - Car is not starting - Seattle, Washington
Noe is knowlegeable and exacting, and speaks in a plain, non-technical language about his diagnoses. It's refreshing after numerous run-arounds with mechanics who tried to be fancy because they thought I didn't know what they were talking about.

Breck

21 years of experience
681 reviews
Breck
21 years of experience
Chevrolet Aveo5 L4-1.6L - Serpentine/Drive Belt - Houston, Texas
Came early and took care of me! Worked quickly, great customer service, and ensured my vehicle was back up and running properly.

Excellent Rating

(68)

Rating Summary
64
1
0
1
2
64
1
0
1
2
Number of Chevrolet Aveo5 services completed
748+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
How Touch-Activated Car Door Locks Work
When When small digital systems appeared in the 1980s, the car industry was quick to pick up and use them. In short order, Ford developed the first computer-controlled keypad door locking system in about 1980. A few years later, small...
The History of Car Tires
Since Since the inception of rubber pneumatic tires in 1888 on the Benz gasoline powered car, advancements in materials and technology have made huge strides. Air-filled tires began to increase in popularity in 1895 and have been the norm since...

Car won't stay crank

I would need more information in order to give you a precise answer. It is impossible to determine what is wrong with your vehicle with just this description, but there are a few possibilities that I'll list. The starting issue...

Car will not shift, speedomete is erratic..

Hey there: It's possible that the speedometer sensor is the source of your shifting and speedometer issues. The speedometer sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-speedometer-sensor) is designed to register the driveshaft’s rotational speed and relay this information through the speedometer cable and to the...

Are the two ignition modules interchangeable?

The two modules should have a part number clearly indicated on the top, if they are the same, then the modules are interchangeable. If there is a suffix A or B or something like that at the end, there may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com