Cadillac Fleetwood Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Cadillac Fleetwood Power Steering Pressure Hose Replacement is $196 with $56 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Cadillac FleetwoodV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$353.96Shop/Dealer Price$410.00 - $563.95
1994 Cadillac FleetwoodV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$577.16Shop/Dealer Price$641.55 - $817.41
1992 Cadillac FleetwoodV8-4.9LService typePower Steering Pressure Hose ReplacementEstimate$474.68Shop/Dealer Price$533.51 - $696.83
1991 Cadillac FleetwoodV8-4.9LService typePower Steering Pressure Hose ReplacementEstimate$547.68Shop/Dealer Price$608.13 - $772.66
1996 Cadillac FleetwoodV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$577.16Shop/Dealer Price$647.84 - $828.42
1995 Cadillac FleetwoodV8-5.7LService typePower Steering Pressure Hose ReplacementEstimate$577.16Shop/Dealer Price$642.24 - $818.62
1990 Cadillac FleetwoodV8-4.5LService typePower Steering Pressure Hose ReplacementEstimate$570.46Shop/Dealer Price$636.67 - $818.33
Show example Cadillac Fleetwood Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(33)

Rating Summary
31
2
0
0
0
31
2
0
0
0

Richard

14 years of experience
601 reviews
Richard
14 years of experience
Cadillac Fleetwood V8-5.0L - Brake Pads Replacement (Front) - Henderson, Nevada
Very nice man and great mechanic. I will never accept anybody else!

Rodney

37 years of experience
611 reviews
Rodney
37 years of experience
Cadillac Fleetwood V8-4.1L - Turn Signal Switch - Vacaville, California
He came on time and fixed the turn signals like a professional!!!

Shay

29 years of experience
137 reviews
Shay
29 years of experience
Cadillac Fleetwood V8-5.7L - Fuel Filter - League City, Texas
Shay met my Father to replace his fuel filter and check to see if that was the problem that kept the car from running. Of course, the car started with no problem and kept running. We had Shay go ahead and put the fuel filter on and give us a quote for several other repairs needed on my Dad's Cadillac. Everything went well with the job. My Dad said Shay was very nice and very helpful.

Eric

13 years of experience
230 reviews
Eric
13 years of experience
Cadillac Fleetwood V8-5.7L - Tune-up - Cary, North Carolina
Eric provided professional service by diligently evaluating my 93 Cadillac Fleetwood Brougham. As a result, he was able to discover exactly what was preventing my car from starting. I will request and recommend Eric for future vehicle repair service for his attention to detail and thoroughness in the performance of his work.

Excellent Rating

(33)

Rating Summary
31
2
0
0
0
31
2
0
0
0
Number of Cadillac Fleetwood services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

Least Expensive Luxury Cars to Insure
You’ve You’ve done well for yourself and are now in the market for a vehicle upgrade. It’s time to ditch the rattletrap you’ve been driving and snag yourself a car with some premium options. How do you decide which car...
P2123 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D Circuit High Input
P2123 P2123 Code Definition Throttle/Pedal Position Sensor/Switch D Circuit High Input What the P2123 code means The P2123 trouble code indicates that the Engine Control Module (ECM), which is in charge of receiving a signal from the throttle position sensor,...
How to Add Headlight Covers
A A current trend in the automotive industry is to blackout a vehicle. That includes tinting the windows dark, installing black nameplates and emblems, black rims, and black tinted light assemblies. Aftermarket parts (https://www.yourmechanic.com/article/all-about-aftermarket-parts) and accessories achieve the same look,...

Getting error code P0172

This code refers to a rich condition on bank 1. This means that the oxygen sensor detected too little oxygen in the exhaust pipe. A rich condition can be caused by many things like leaking injectors, a misfire in one...

Electrical problem

Electrical concerns can often times be difficult to narrow down. It appears that your Mazda may have corrosion issues with its battery cables. It is not uncommon for the battery cables to develop corrosion near the battery terminals. Corrosion tends...

Replace key battery message on Mercedes won't go off

It is possible that the key fob battery warning light has to be reset manually and does not go off automatically when the batteries are replaced. I would recommend looking through your owners manual to see if there is a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com