BMW 318ti Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a BMW 318ti Power Steering Pressure Hose Replacement is $546 with $406 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 BMW 318tiL4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$1063.96Shop/Dealer Price$1287.77 - $1940.75
1995 BMW 318tiL4-1.8LService typePower Steering Pressure Hose ReplacementEstimate$957.95Shop/Dealer Price$1164.15 - $1775.53
1996 BMW 318tiL4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$1052.25Shop/Dealer Price$1272.09 - $1922.11
1998 BMW 318tiL4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$1052.25Shop/Dealer Price$1272.09 - $1922.10
1999 BMW 318tiL4-1.9LService typePower Steering Pressure Hose ReplacementEstimate$1052.25Shop/Dealer Price$1275.44 - $1927.97
Show example BMW 318ti Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
5
2
0
0
0
5
2
0
0
0

Trevor

23 years of experience
185 reviews
Trevor
23 years of experience
BMW 318ti L4-1.9L - Pre-purchase Car Inspection - San Marcos, California
Trevor was honest and very helpful. I highly recommend him.

Keith

19 years of experience
406 reviews
Keith
19 years of experience
BMW 318ti L4-1.8L - Car is not starting - Lakeland, Florida
Keith was awesome and was very helpful. He ran through everything that could be wrong with my engine and was able to pin point the problem. Very happy with how everything went!

Casime

13 years of experience
56 reviews
Casime
13 years of experience
BMW 318ti L4-1.9L - Car Starter Repair - Clementon, New Jersey
very efficient and thorough with his work. He had lots of patience while fixing my car which shows professionalism. Satisfied with the work done. Thank you.

Steven

15 years of experience
425 reviews
Steven
15 years of experience
BMW 318ti L4-1.9L - Oil Change - Glendale, Arizona
I tried this service through an amazon coupon offer and was very impressed with it.

Excellent Rating

(7)

Rating Summary
5
2
0
0
0
5
2
0
0
0
Number of BMW 318ti services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in Singapore
Singapore Singapore is a vacation destination (https://www.tripadvisor.com/Attractions-g294265-Activities-Singapore.html) that has something for everyone to enjoy. You can visit the Singapore Zoo, or take a tour of the Chinatown areas. You might want to see what’s happening at Universal Studios Singapore, visit...
P3485 OBD-II Trouble Code: Cylinder 11 Exhaust Valve Control Malfunction
P3485 means an issue with cylinder 11’s exhaust valve control circuit which causes sluggish acceleration and decreased fuel economy.
The Guide to Legal Car Modifications in Nebraska
ARENA Creative / Shutterstock.com If you live in Nebraska or plan to move to the state and you have a modified vehicle, you need to know the laws and regulations to make sure your car or truck...

Should I change the camber of my wheels?

Suspension systems and the angles of wheels are engineered to work together for optimal performance and to minimize tire wear. It has become increasingly popular among the “tuner” scene to achieve the look of maxed camber, as the wheels visually...

Truck leaking oil after adding product.

The oil additive is supposed to cover any mechanical part the product touches excluding seals unless they need replaced with a covered part. This means your seals by themselves are not covered. The oil pressure gauge reading H all the...

Idle rough

There are a number of things that may cause a rough idle. A rough idle (https://www.yourmechanic.com/services/car-idle-is-rough-inspection) may be caused by things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com