Hallo Billy


Hallo Billy Mechanic's Assistant: Hi. How can I help? I have identified the front timing mark of the camshaft but cannot located the Fly wheel mark Mechanic's Assistant: How many miles are on the car? Have you not...

Hallo Billy Mechanic's Assistant: Hi. How can I help? I have identified the front timing mark of the camshaft but cannot located the Fly wheel mark Mechanic's Assistant: How many miles are on the car? Have you noticed any change in your gas mileage lately? 178900km the belt broke loose because of the tensioner i think it jumped timing Mechanic's Assistant: What is the make/model/year of your car? Also self raving the rave counter always on top Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? 1998 freelander tci diesel turbo Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I can fix it myself as long as i identify the flywheel mark

Automotive Expert
Hi my name is \*\*\*\*\* \*\*\*\*\* me just find the timing procedure.

Freelander TCI diesel 1998 2.0Lcan not call from here sorry maybe whatsup call can do
Automotive Expert
Just waiting for a lap top with the data on to start up.

okay thanks
Automotive Expert
Locking tool required part number LRT-12-058 I will look in to that.

You can sent pictures they will help
Automotive Expert
If i remember correctly you can use a drill bit let me look a bit deeper.

that position where i use a drill bit i cannot see it have checked under the pump
Automotive Expert
Let me get some picture for you.

thank you
Automotive Expert
Does this photo open up.

I MANAGED TO OPEN LET ME TO THE VEHICLE AND CHECK THE FLYWHEEL POINTCAN YOU ALSO REAR CAMSHAFT AND PUMP ON YOUR PICTURE ITS NOT SHOWING
Automotive Expert
Yes i can give me a min.
Automotive Expert
I will send the procedure next.
Automotive Expert
Removal
Automotive Expert
Do you want the pump info.

Billy the pump is good the belt is the one that skipped one or two teeth because of the tensioner
Automotive Expert
Do you need anymore info.

Thank you let me use what you have send me will talk again tomorrow
Automotive Expert
No problem talk Tomorrow regards Gavin.

Thank you my request worked only that I didn’t know that the flywheel opening is at the back of the engine under the sensorThank you once againJoel
Automotive Expert
No problem if you need anymore help just get back to me regards Gavin.

What others are asking

How do I use the horn?
To sound the horn, firmly press the center of the steering wheel. The horn will sound for as long as you press the wheel.
Transmission replaced, but still slipping - 2009 Kia Borrego
There's a lot going on here. As far as the transmission concerns, your repair should be under warranty since you had the work done at the dealer. For the rest of the concerns, you may want to hire another technician...
Broken hub bearing
You are absolutely correct. If the vehicle even gets raised up off of the ground the front wheels should be shaken down to see if any play exists. This is especially true if the tires were being replaced. There is...
Can I change the oil from regular to synthetic safely?
Hello, thanks for writing in. Decades ago when synthetic oils were introduced, some older vehicles experienced oil leaks that were believed to be due to synthetic oils having smaller and more consistently sized molecules compared to conventional oil. It was...
Was at red light and car wouldn't go forward after light changed
Hi there: Without being there to complete a diagnostic scan or inspect the vehicle personally, it's very difficult to accurately pinpoint the issue you are having with the Crown Vic. It's possible that you may have a simple electrical sensor...
On A 2008 Mini Cooper should the thermostat be changed with the water pump at the same time?
Hello there. Sometimes a pretty serious impact as you've described above can create rubber hoses or hose fittings to crack or become separated; even if they are in different location than the vehicle impact. Typically it is customary for the...
My 2011 chevy Cruze keeps saying check battery charging system and the battery and alternator are both completely fine. Any ideas?
Hello, thank you for writing in. If you are not able to find any faults with the battery or the alternator, you are going to want to focus on their wires and connections. Make sure all of the wires are...
My 2007 Nissan Murano gas gage stays at empty and recently I started the car and I drove 3ft and it stopped what is going on?
Hi Brittany. Thanks for contacting us today. If the fuel sensor is not working on your Nissan, it may or may not be the cause of the acceleration problems you are having. In most cases this type of symptom is...
Two lights came on today at the same time: check emission system and check VSA system
The check emissions system may be related to many different things such as a problem with an oxygen sensor not reading the exhaust gases properly, a problem with the evaporative emissions system or potentially bad gas cap. The best option...